|
|
5. Fill the crankcase with the proper quantity and grade of engine oil. Refer to Approximate Fluid Capacities and Fluid and Lubricant Recommendations . 6. Remove the oil level indicator. 7. Wipe the indicator with a clean cloth. 8. Install the oil level indicator. 9. Remove the oil level indicator in order to check the level. 10. Add oil if necessary. 11. Close the hood. REPAIR INSTRUCTIONS - OFF VEHICLE DRAINING FLUIDS AND OIL FILTER REMOVAL
2008 Hummer H2 2008 ENGINE Engine Mechanical - 6.2L - H2
Fig. 294: View Of Oil Pan Drain Plug & Seal 1. Remove the oil pan drain plug (430) and O-ring (429).
2008 Hummer H2 2008 ENGINE Engine Mechanical - 6.2L - H2
Fig. 295: View Of Engine Oil Filter 2. Remove the engine oil filter (437).
2008 Hummer H2 2008 ENGINE Engine Mechanical - 6.2L - H2
|
|
|