|
|
Content .. 2992 2993 2994 2995 ..
10. With the aid of an assistant, dry fit the window (1) to the opening in order to determine the correct position. Fig. 91: Aligning Tape Lines On Window To Body 11. Use masking tape in order to mark the locations (1) of the window (2) in the opening. 12. Cut the masking tape in the center and remove the window from the opening.
2008 Chevrolet Silverado 1500 2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 92: Applying Glass Prep 13. Use a new dauber in order to apply glass prep clear #1 to the area approximately 10-16 mm (3/8-5/8 in) around the entire perimeter of the window inner surface. Immediately wipe the glass primed area using a clean, lint-free cloth. IMPORTANT: Use care when applying glass prep clear #1 on the window. This primer dries almost instantly, and may stain the viewing
2008 Chevrolet Silverado 1500 2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 93: Applying Glass Prep 14. Apply a second coat of the glass prep clear #1 to the same area of the glass.
2008 Chevrolet Silverado 1500 2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 94: Applying Glass Primer 15. Shake the glass primer black #2 for at least 1 minute. 16. Use a new dauber in order to apply the glass primer black #2 to the same areas (2) that glass prep clear #1 was applied. 17. Allow the glass primer to dry for approximately 10 minutes. IMPORTANT: The glass primer black #2 is effective up to 8 hours after applying it to the glass. The primed surface of the glass must
2008 Chevrolet Silverado 1500 2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 2992 2993 2994 2995 ..
|
|
|