|
|
Content .. 2973 2974 2975 2976 ..
6. This will allow the urethane adhesive to be separated from the window. Leave a base of urethane on the pinchweld flange. The only suitable lubrication is clear water. Use J 24402-A , J 39040 or equivalent in order to remove the window. See Special 7. Open the window, if equipped. Fig. 27: View Of Rear Window (Pickup) IMPORTANT: Keep the cutting edge of the tool against the window.
2008 Chevrolet Silverado 1500 2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
8. With the aid of an assistant, remove the window from the opening. Installation Procedure 1. Install a stationary window into the opening. Refer to Adhesive Installation of Stationary Windows (Windshield) or Adhesive Installation of Stationary Windows (Rear 2. Install the rear sliding window regulator, if equipped. Refer to Rear Sliding Window Regulator Replacement. 3. Install the window lower garnish molding. Refer to Rear Window Lower Garnish Molding Replacement (Regular Cab) or Rear Window Lower Garnish Molding 4. Install both rear seat headrests (extended cab). Refer to Head Restraint Replacement . 5. Raise the rear seat back. 6. Remove the double layer of masking tape around the perimeter of the painted surfaces and interior trim. REAR SLIDING WINDOW REPLACEMENT Removal Procedure
2008 Chevrolet Silverado 1500 2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 28: View Of Rear Sliding Window Stops 1. Cycle the rear sliding window to the halfway position. 2. Remove the rear lower garnish molding. Refer to Rear Window Lower Garnish Molding Replacement (Regular Cab) or Rear Window Lower Garnish Molding Replacement IMPORTANT: The new rear sliding window regulator and cables are serviced as an assembly. IMPORTANT: Use a suitable tool to lift upward on the rear sliding window stops (1) to remove.
2008 Chevrolet Silverado 1500 2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
3. Remove the rear sliding window stops (1). Fig. 29: View Of Rear Sliding Window Pulley Covers 4. Remove the rear sliding window pulley covers (2). IMPORTANT: Use a suitable tool to release the tabs (1) from the rear sliding window pulley (3).
2008 Chevrolet Silverado 1500 2008 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 2973 2974 2975 2976 ..
|
|
|