|
|
Fig. 694: Locating Spark Plugs 12. Measure the spark plugs for the proper gap. Adjust the spark plug gap if necessary. Specification: Spark plug gap to 1.52 mm (0.060 in). 13. Install the spark plugs. Tighten: Tighten the spark plugs to 15 N.m (11 lb ft). VALVE ROCKER ARM AND PUSH ROD INSTALLATION
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
Fig. 695: View Of Valve Pushrods 1. Install the valve pushrods. IMPORTANT: Be sure to keep parts in order. Parts must be reinstalled into the original location and position.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
Fig. 696: Locating Arrow On Valve Rocker Arm Support 2. Install the valve rocker arm supports. IMPORTANT: Be sure that the arrow on the valve rocker arm support is in the up position.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
Fig. 697: Pushrod Socket, Roller Pivot & Valve Stem Tip 3. Apply prelube GM P/N 12345501 (Canadian P/N 992704) or equivalent, to the following valve rocker arm contact surfaces: Valve pushrod socket (1) Roller pivot (2) Valve stem tip (3)
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.3L - Sierra & Silverado
|
|
|