|
|
Content .. 2033 2034 2035 2036 ..
Fig. 19: View Of Oil Pump Screen & O-Ring Seal 1. Remove the oil pan. Refer to Oil Pan Replacement (2WD) or Oil Pan Replacement (4WD) . 2. Remove the engine front cover. Refer to Engine Front Cover Replacement (LC9, LH6, LMG, LY2 and LY5) or Engine Front Cover Replacement (LY6, L76 and L92) . 3. Remove the oil pump screen bolt and nuts. 4. Remove the oil pump screen with O-ring seal.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
5. Remove the O-ring seal from the pump screen. 6. Discard the O-ring seal. Fig. 20: View Of Crankshaft Oil Deflector & Nuts 7. Remove the remaining crankshaft oil deflector nuts. 8. Remove the crankshaft oil deflector.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 21: View Of Oil Pump & Bolts 9. Remove the oil pump bolts (411). 10. Remove the oil pump (413). Installation Procedure IMPORTANT: Do not allow dirt or debris to enter the oil pump assembly, cap end as necessary. IMPORTANT: Inspect the engine block oil galley passages. These areas must
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 22: View Of Oil Pump & Bolts 1. Align the splined surfaces of the crankshaft sprocket and the oil pump drive gear and install the oil pump (413). 2. Install the oil pump (413) onto the crankshaft sprocket until the pump housing contacts the face of the engine block. be free and clear of debris or restrictions. NOTE: Refer to Fastener Notice .
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 2033 2034 2035 2036 ..
|
|
|