|
|
Content .. 1945 1946 1947 1948 ..
Fig. 165: View Of Intake Manifold-To-Cylinder Head Gasket 21. Install NEW intake manifold gaskets (514) to the intake manifold. 22. Remove the covers from the cylinder head passages.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 166: View Of Intake Manifold Bolts 23. Install the intake manifold (500). IMPORTANT: The aid of an assistant may be helpful in holding the engine
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
24. Tighten the intake manifold bolts (512) until snug. Fig. 167: Intake Manifold Bolt Tightening Sequence 25. Tighten the intake manifold bolts to specifications. Tighten: Tighten the bolts a first pass in the sequence shown to 5 N.m (44 lb in). Tighten the bolts a final pass in the sequence shown to 10 N.m (89 lb in). harness up out of the way so the upper intake manifold cover
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 168: View Of PCV Hose 26. Position and install the PCV hose to the intake manifold fitting.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 1945 1946 1947 1948 ..
|
|
|