|
|
Content .. 1909 1910 1911 1912 ..
Courtesy of GENERAL MOTORS CORP. 1. If the vehicle is equipped with four wheel drive (4WD), remove the front drive axle. Refer to Differential Carrier Assembly Replacement (1500 FWD) or Differential Carrier 2. Lower the vehicle. 3. Remove the left wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side (Chevrolet) or Front Wheelhouse Liner Replacement - Left Side (GMC) . 4. Remove the engine mount to frame bolts (1). 5. Raise and support the vehicle halfway. Refer to Lifting and Jacking the Vehicle . Fig. 26: Locating Tab On Engine Block IMPORTANT: DO NOT raise and/or support the engine by the crankshaft
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
6. Place an adjustable (screw type) jack to the tab (1) located on the engine block. 7. Remove the left side exhaust manifold heatshield. Refer to Exhaust Manifold Heat Shield Replacement - Left Side (4.8L, 5.3L, 6.0L, and 6.2L) . Fig. 27: View Of Engine Mount To Engine Bolts 8. Remove the engine mount to engine bolts (1). 9. Using the adjustable jack, raise the engine slightly until there is enough clearance to remove the engine mount. balancer, or the oil pan.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 28: View Of Engine Mount 10. Remove the engine mount. Installation Procedure
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 29: View Of Engine Mount 1. Position the engine mount to the engine.
2008 Chevrolet Silverado 1500 2008 ENGINE Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 1909 1910 1911 1912 ..
|
|
|