|
|
Content .. 1083 1084 1085 1086 ..
Fig. 227: View Of Transmission Heat Shield Bolts & Shield 15. Install the two bolts securing the heat shield to the transmission. Tighten: Tighten the bolt to 17 N.m (13 lb ft). 16. Install the transfer case, if equipped. Refer to the appropriate procedure: Transfer Case Assembly Replacement for the MP 1222/1225/1226-NQG transfer Transfer Case Assembly Replacement for the MP 1625/1626-NQF transfer case Transfer Case Assembly Replacement for the MP 3023/3024-NQH transfer case
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 228: View Of Transfer Case Vent Tube Hose 17. Connect the vent hose and electrical connectors to the transfer case, if equipped.
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Fig. 229: View Of Flywheel To Torque Converter Bolts 18. If reusing the torque converter bolts, clean the bolt threads and apply LOCTITE 242, GM P/N 12345382 (Canadian P/N 10953489), or equivalent to the threads prior to installation. 19. Install the flywheel to torque converter bolts.
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Tighten: Tighten the bolts to 63 N.m (46 lb ft). Fig. 230: View Of Right Flywheel Inspection Cover 20. Remove the flywheel inspection cover. 21. Install the starter motor. Refer to Starter Motor Replacement (4.3L) or Starter Motor Replacement (4.8L, 5.3L, 6.0L, and 6.2L) or Starter Motor Replacement (6.6L) .
2008 Chevrolet Silverado 1500 2008 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E/4L70-E - Cab & Chassis Sierra, Cab & Chassis Silverado, Sierra & Silverado
Content .. 1083 1084 1085 1086 ..
|
|
|