|
|
CHERY AUTOMOBILE CO., LTD Automatic Transmission Fault Diagnosis Manual 3. Remove the jack and lower the vehicle; Install the bolt connecting the upper part of the converter with the engine; Tightening torque: 75Nm
Lift the vehicle; Install the bolt connecting the torque converter with the targeted wheel. Rotate the targeted when installing in order to install all connecting bolts. Tightening torque: 45Nm 8. front suspension. Plug on the vehicle speed sensor’s terminals. . Install the transmission’s drive shaft; . Install two front wheels; . Lower the vehicle; . Install the left back suspension; . Remove the crane . Install the oil cooling pipe; . Install the throttle cable on the throttle’s swing arm; . Connect the neutral positioning 18. 19. hift cable and the gearshift arm; . Install the cooler’s top cover; . Install the battery. 4. 5. 6. 7. Install the engine’s front seat. Install the bolt connecting transmission with the 9. 10 11 12 13 14 15 16 17 switch; Install the gearshift cable; Connect the gears 20 21 66 |