|
|
10 01 02 SNR9A00J46166453971KBAT00 20-135 20-135 Rear Seat-back Latch Replacement A B B A B A B Fastener Locations A : Bolt, 2 6 x 1.0 mm 3. Fold the seat-back down. 4. Lift the seat side bolster (A) up to release the hook (B), then remove the seat side bolster. 5. Install the side bolster in the reverse order of removal, and note these items: • Guide the belts over the front of the seat side bolster as you install the bolster. • Before attaching the seat side bolster, make sure there are no twists or kinks in the seat belts. NOTE: Take care not to bend or scratch the interior trim. 1. Remove the rear shelf (see page 20-78). 2. From the trunk compartment, disconnect the seat- back release cable (A) from the seat-back latch (B). 3. Remove the bolts, then remove the seat-back latch (A). 08/08/21 15:04:04 61SNR030_200_0137 |