Polaris Ace RZR 570, RZR 570 EPS (2018 year). Manual - part 7

29

FEATURES AND CONTROLS

Seat Belts

This POLARIS vehicle is equipped with seat belts for all riders. Always 
make sure the seat belts are secured for the operator and passenger 
before riding. The driver’s seat belt is equipped with a seat belt 
interlock. Vehicle speed will be limited to 15 MPH (24 km/h) if the seat 
belt is not secured.

3-Point Seat Belt

To wear the 3-point seat belt properly, follow this procedure:

1. Pull the seat belt latch downward and across your chest toward the 

buckle at the inner edge of the seat. The belt should fit snugly across 
your hips and diagonally across your chest. Make sure the belt is not 
twisted.

2. Push the latch plate into the buckle until it clicks. Pull up on the 

strap to tighten.

3. Press the red release latch on the buckle to release the seat belt.

Seat Belt Height Adjuster (if equipped)

A breakthrough in comfort, the seat belt height 
adjuster reduces neck rub and works as a 
shock absorber for your shoulder. The height 
adjuster consists of an adjuster (1) and a rail 
(2). (3) designates the adjustment zone.

HOW TO ADJUST THE HEIGHT OF YOUR SEAT 
BELT FOR DESIRED COMFORT AND PROPER 
FIT

continued on next page

1

2

3

Proper location 

of shoulder belt

Wrong

Wrong

30

FEATURES AND CONTROLS

Seat Belts

Seat Belt Height Adjuster (if equipped)

STEP 1

Stretch the seat belt height adjuster toward the 
front of the vehicle.

STEP 2

While continuing to stretch the seat belt 
height adjuster, slide the adjuster up or down, 
rocking it side to side if necessary, until you 
reach the desired height. This may require 
both hands. Do not attempt to adjust while 
vehicle is in motion.

NOTE: Adjustment becomes easier with 
repeated use.

CLEANING INSTRUCTIONS: The seat belt height adjuster can be 
cleaned with water.

STEP 1

STEP 2

31

FEATURES AND CONTROLS

Seat Belts

Seat Belt Inspection

Inspect all seat belts for proper operation before each use of the vehicle.

1. Push the latch plate into the buckle until it clicks. The latch plate 

must slide smoothly into the buckle. A click indicates that it's 
securely latched.

2. Push the red release latch in the middle of the buckle to make sure it 

releases freely. 

3. Pull each seat belt completely out and inspect the full length for any 

damage, including cuts, wear, fraying or stiffness. If any damage is 
found, or if the seat belt does not operate properly, have the seat belt 
system checked and/or replaced. Your authorized POLARIS dealer 
can assist.

4. To clean dirt or debris from 

the seat belts, sponge the 
straps with mild soap and 
water. Do not use bleach, 
dye or household 
detergents.Use a garden 
hose to flush out the 
retractor and latch housings 
regularly.

Retractor 

Housing

Latch Housings

32

FEATURES AND CONTROLS

Switches

Auxiliary Outlet

The vehicle is equipped with a 12-volt accessory outlet on the dash. Use 
the outlet to power an auxiliary light or other optional accessories or 
lights. For service, the dash outlet connection is under the dash.

AWD 

Switch

12V Accessory

Outlet

Ignition Switch

Light Switch (Base Model)

Instrument Cluster

Light Switch 

(LE Model)