|
|
Note ♦ The following describes adjusting the left rear door. Adjusting the right rear door is identical. ♦ When closing, the rear door must latch completely without having to press it and it must not have any play. ♦ The rear door must not be pushed up or down when adjusting the catch. The alignment of the rear door to the side panel can be adjusted using the catch in direction of -arrows a and b- (wind noises). -3-. Note More force is needed to move the catch -2- when the bolts -3- are loose. – Tighten the bolts -3- of the catch -2-. Component Tightening Specification Striker pin to the body 20 Nm 1.5 Door Arrester, Removing and Installing Special tools and workshop equipment required Note The following describes the removal and installation of the left door strap. The right side is identical. |