|
|
QUICK REFERENCE CHART: ALTIMA 2009 Brake Specifications INFOID:0000000003301444 Unit: mm (in) Brake Pedal INFOID:0000000003301445 Front Disc Brake INFOID:0000000003301446 Rear Disc Brake INFOID:0000000003301447 Front brake Brake model Kiriu Cylinder bore diameter 57.2 (2.25) Pad length × width × thickness 132 × 50 × 11 (5.20 × 1.969 × 0.433) Rotor outer diameter × thickness 296 × 26 (11.70 × 1.02) Rear brake Brake model Kiriu Cylinder bore diameter 34.93 (1.375) Pad length × width × thickness 83.0 × 31.9 × 8.5 (3.268 × 1.256 × 0.335) Rotor outer diameter × thickness 292 × 9 (11.50 × 0.35) Master cylinder Cylinder bore diameter 25.4 (1) Control valve Valve model Electric brake force distribution Brake booster Booster model Bosch Diaphragm diameter 280 (11) Recommended brake fluid DOT 3 Brake pedal height (from dash lower panel top surface) CVT 190.7 - 202.7 mm (7.51 - 7.98 in) M/T 181.3 -193.3 mm (7.14 - 7.61 in) Depressed pedal height [under a force of 490 N (50 kg-f, 110 CVT 60.7 - 72.7 mm (2.39 - 2.86 in) M/T 51.3 - 63.3 mm (2.02 - 2.49 in) Clearance between stopper rubber and threaded end of the stop lamp 0.74 - 1.96 mm (0.0291 - 0.0772 in) Pedal play 3 - 11 mm (0.12 - 0.43 in) Brake model Kiriu Brake pad Standard thickness (new) 11.0 mm (0.433 in) Repair limit thickness 2.0 mm (0.079 in) Disc rotor Standard thickness (new) 26.0 mm (1.024 in) Repair limit thickness 24.0 mm (0.945 in) Thickness variation (measured at 8 positions) 0.015 mm (0.0006 in) Maximum runout (with it attached to the vehicle) 0.035 mm (0.0014 in) Brake model Kiriu Brake pad Standard thickness (new) 8.5 mm (0.335 in) Repair limit thickness 1.0 mm (0.039 in) Disc rotor Standard thickness (new) 9.0 mm (0.354in) Repair limit thickness 8.0 mm (0.315 in) Thickness variation (measured at 8 positions) 0.015 mm (0.0006 in) Maximum runout (with it attached to the vehicle) 0.05 mm (0.002 in) |