Nissan Rogue. Manual - part 340

DLK-202

< DTC/CIRCUIT DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

BACK DOOR CLOSURE MOTOR

BACK DOOR CLOSURE MOTOR

Diagnosis Procedure

INFOID:0000000011278934

Regarding Wiring Diagram information, refer to 

DLK-90, "Wiring Diagram"

.

1.

CHECK BACK DOOR CLOSURE MOTOR INPUT SIGNAL

1. Turn ignition switch OFF.

2. Disconnect back door lock assembly connector.

3. Check voltage between back door lock assembly harness connector and ground. 

Is the inspection result normal?

YES

>> Replace back door lock assembly. Refer to 

DLK-270, "DOOR LOCK : Removal and Installation"

.

NO

>> GO TO 2.

2.

CHECK BACK DOOR CLOSURE MOTOR CIRCUIT

1. Disconnect automatic back door control module connector.

2. Check continuity between automatic back door control module harness connector and back door lock

assembly harness connector. 

3. Check continuity between automatic back door control module harness connector and ground.

Is the inspection result normal?

YES

>> Replace automatic back door control module. Refer to 

DLK-283, "Removal and Installation"

.

NO

>> Repair or replace harness.

(+)

(–)

Condition

Voltage

(Approx.) 

Back door lock assembly

 Connector

Terminal

D512

1

Ground

Back door opener 
switch

Pressed

Battery voltage

2

Released

0  V

Automatic back door control module

Back door lock assembly

Continuity 

 Connector

Terminal

 Connector

Terminal

B56

31

D512

1

Yes

38

2

Automatic back door control module

Ground

Continuity 

 Connector

Terminal

B56

31

No

38

2015 Rogue NAM

AUTOMATIC BACK DOOR WARNING BUZZER

DLK-203

< DTC/CIRCUIT DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

AUTOMATIC BACK DOOR WARNING BUZZER

Diagnosis Procedure

INFOID:0000000011278935

Regarding Wiring Diagram information, refer to 

DLK-90, "Wiring Diagram"

.

1.

CHECK BACK DOOR WARNING CHIME POWER SUPPLY CIRCUIT

1. Turn ignition switch OFF.

2. Disconnect back door warning chime connector.

3. Check voltage between back door warning chime harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> GO TO 2.

2.

CHECK BACK DOOR WARNING CHIME OUTPUT SIGNAL CIRCUIT

1. Disconnect automatic back door control module connector.

2. Check continuity between automatic back door control module harness connector and back door warning

chime harness connector.

3. Check continuity between automatic back door control module harness connector and ground.

Is the inspection result normal?

YES

>> Replace automatic back door control module. Refer to 

DLK-283, "Removal and Installation"

.

NO

>> Repair or replace harness.

3.

CHECK BACK DOOR WARNING CHIME GROUND CIRCUIT

Check continuity between back door warning chime harness connector and ground.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace harness.

4.

CHECK BACK DOOR WARNING CHIME 

Refer to 

DLK-204, "Component Inspection"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Replace back door warning chime. Refer to 

DLK-281, "Removal and Installation"

.

(+)

(–)

Voltage

(Approx.) 

 Back door warning chime

 Connector

Terminal

B61

1

Ground

Battery voltage

Automatic back door control module

 Back door warning chime

Continuity 

Connector

Terminal

Connector

Terminal

B56

37

B61

1

Yes

Automatic back door control module

Ground

Continuity 

Connector

Terminal

B56

37

No

Back door warning chime

Ground

Continuity 

Connector

Terminal

B61

2

Yes

2015 Rogue NAM

DLK-204

< DTC/CIRCUIT DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

AUTOMATIC BACK DOOR WARNING BUZZER

5.

CHECK INTERMITTENT INCIDENT

Refer to 

GI-44, "Intermittent Incident"

.

>> Inspection End.

Component Inspection

INFOID:0000000011278936

1.

CHECK BACK DOOR WARNING CHIME

1. Turn ignition switch OFF.

2. Disconnect back door warning chime connector.

3. Check battery power supply directly to back door warning chime terminals and check the operation.

Is the inspection result normal?

YES

>> Inspection End.

NO

>> Replace back door warning chime. Refer to 

DLK-281, "Removal and Installation"

.

 back door warning chime

Operation

Terminal

(+)

(-)

1

2

Chime sounds

2015 Rogue NAM

INTEGRATED HOMELINK TRANSMITTER

DLK-205

< DTC/CIRCUIT DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

INTEGRATED HOMELINK TRANSMITTER

Component Function Check

INFOID:0000000011278937

1.

CHECK FUNCTION

Check that system receiver (garage door opener, etc.) operates with original hand-held transmitter.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Receiver or hand-held transmitter is malfunctioning.

2.

CHECK ILLUMINATE

1. Turn ignition switch OFF.

2. Does red light of transmitter illuminate when any transmitter button is pressed?
Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Refer to 

DLK-205, "Diagnosis Procedure"

.

3.

CHECK TRANSMITTER

Check transmitter with Tool*.

*:For details, refer to Technical Service Bulletin.
Is the inspection result normal?

YES

>> Receiver or hand-held transmitter malfunction, not vehicle related.

NO

>> Replace auto anti-dazzling inside mirror (Homelink

®

 universal transceiver). Refer to 

MIR-20,

"Removal and Installation"

.

Diagnosis Procedure

INFOID:0000000011278938

Regarding Wiring Diagram information, refer to 

DLK-101, "Wiring Diagram"

.

1.

CHECK POWER SUPPLY

1. Turn ignition switch OFF.
2. Disconnect auto anti-dazzling inside mirror (Homelink

®

 universal transceiver) connector.

3. Check voltage between auto anti-dazzling inside mirror (Homelink

®

 universal transceiver) harness con-

nector and ground.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check the following items:

• 5A fuse 14 located in the fuse block (J/B).

• 10A fuse 30 located in the fuse block (J/B).
• Harness for open or short between fuse and auto anti-dazzling inside mirror (Homelink

®

 univer-

sal transceiver).

2.

CHECK GROUND CIRCUIT

Check continuity between auto anti-dazzling inside mirror (Homelink

®

 universal transceiver) harness connec-

tor and ground.

Auto anti-dazzling inside mirror

(Homelink

®

 universal transceiv-

er) connector

Terminal Condition

Voltage (V)

(Approx.)

R7

10

Ground

Ignition switch position: 
OFF

Battery voltage

6

Ignition switch position: 
ON

2015 Rogue NAM