Content .. 1935 1936 1937 1938 ..
Nissan Qashqai J11. Manual - part 1937
PCS-20
< SYSTEM DESCRIPTION >
[IPDM E/R]
DIAGNOSIS SYSTEM (IPDM E/R)
ACTIVE TEST
WORK SUPPORT
NMB HL (LO) RH CIRC RETRY
[0 – 20]
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the
headlamp (LO) (right) circuit.
NOTE:
When the number of short circuits in the headlamp (LO) (right) circuit count is 5 and
the ignition switch OFF to ON operation is detected, this item counts 1.
NMB HL (LO) RH CIRC SHORT
[0 – 5]
Monitor the number of times that the smart FET in IPDM E/R detects the over current
of the headlamp (LO) (right) circuit.
T LAMP LH CIRC MALFUNCTN
[0 – 1]
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper
limit of the tail lamp (left) circuit.
NOTE:
When the number of tail lamp (left) circuit retries count is 20, this item counts 1.
NMB T LAMP LH CIRC RETRY
[0 – 20]
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the
tail lamp (left) circuit.
NOTE:
When the number of short circuits in the tail lamp (left) circuit count is 5 and the igni-
tion switch OFF to ON operation is detected, this item counts 1.
NMB T LAMP LH CIRC SHORT
[0 – 5]
Monitor the number of times that the smart FET in IPDM E/R detects the over current
of the tail lamp (left) circuit.
T LAMP RH CIRC MALFUNCTN
[0 – 1]
Monitor the number of times that the smart FET in IPDM E/R reaches the retry upper
limit of the tail lamp (right) circuit.
NOTE:
When the number of tail lamp (right) circuit retries count is 20, this item counts 1.
NMB T LAMP RH CIRC RETRY
[0 – 20]
Monitor the number of times that the smart FET in IPDM E/R permits the retry of the
tail lamp (right) circuit.
NOTE:
When the number of short circuits in the tail lamp (right) circuit count is 5 and the ig-
nition switch OFF to ON operation is detected, this item counts 1.
NMB T LAMP RH CIRC SHORT
[0 – 5]
Monitor the number of times that the smart FET in IPDM E/R detects the over current
of the tail lamp (right) circuit.
BATTERY STATUS
[OK/NG]
Monitor the battery status from the battery output.
Monitor Item
[Unit]
Description
Test item
Operation
Description
HORN
On
Operates horn relay for 20 ms.
FRONT WIPER
Off
OFF
Lo
Operates the front wiper relay.
Hi
Operates the front wiper relay and front wiper HI/LO relay.
HEAD LAMP WASHER
On
Operates the headlamp washer relay for 1 second.
EXTERNAL LAMPS
Off
OFF
TAIL
Operates the tail lamp relay.
Lo
Operates the headlamp low relay.
Hi
Operates the headlamp low relay and ON/OFF the headlamp high relay at 1
second intervals.
Fog
Operates the front fog lamp relay.
Work item
Description
SENSOR INITILALIZE
Adjusts the height sensor signal output value in the unloaded vehicle condition.
CML B/DCHRG CRNT CLEAR
In this mode, cumulative battery discharge current is cleared.