|
|
STEP 3. M.U.T.-III diagnostic trouble code Q:Is DTC C1020 also set? YES: Perform the diagnosis for the diagnostic trouble code C1020. (Refer to P.35C-23.) NO: Go to Step 4. STEP 4. Check for wheel speed sensor installation Q:Is the check result normal? YES: Go to Step 5. NO: Reinstall the wheel speed sensor correctly. STEP 5. Check for wheel speed sensor as a single unit Q:Is the check result normal? YES: Go to Step 6. NO: Replace the wheel speed sensor. STEP 6. Check for wheel bearing looseness NOTE: Loose wheel bearing may increase the gap between the wheel speed sensor and the wheel speed detection magnet Q:Is the check result normal? YES: Go to Step 7. NO: Replace the rear wheel hub assembly. ACTIVE SKID CONTROL SYSTEM (ASC) 35C-63 DIAGNOSIS |