|
|
ENGINE - TD4 REPAIRS 12-1-23 28. Remove 5 Allen screws and 1 cylinder head bolt securing cylinder head to timing cover. 29. Remove in sequence and discard 11 cylinder head bolts. 30. With assistance, remove cylinder head. Care must be taken to avoid damage to 31. Identify thickness of cylinder head gasket by number of holes. Remove and discard gasket. Refit 1. Clean mating faces of cylinder head and cylinder block, dowels and dowel holes. If 2. Using a straight edge and feeler gauges, check cylinder head for distortion along lines shown in 3. Replace cylinder head if figures obtained exceed those given. Cylinder head must not be |