Index Isuzu Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross - service repair manual 1999-2002 year
|
|
6E–154 6VE1 3.5L ENGINE DRIVEABILITY AND EMISSIONS DTC P0113 –IAT Sensor Circuit High Voltage (Cont'd) Step No Yes Value(s) Action 6 Check for poor connections at the IAT sensor and Did any terminals require replacement? — Verify repair Go to Step 10 7 1. Ignition “OFF”. ground circuit for an open. 3. If the IAT sensor ground circuit is open, repair it as necessary. Was the IAT sensor ground circuit open? — Verify repair Go to Step 9 8 1. Ignition “OFF”. circuit for an open. 3. If the IAT sensor signal circuit is open, repair it as necessary. Was the IAT signal circuit open? — Verify repair Go to Step 9 9 Check for a poor sensor ground or IAT signal circuit Did any of the terminals need to be replaced? — Verify repair Go to Step 11 10 Replace the IAT sensor. Is the action complete? — Verify repair — 11 Replace the PCM. IMPORTANT: The replacement PCM must be On-Vehicle Service in Powertrain Control Module and Sensors for And also refer to latest Service Bulletin. Check to see if the Latest software is released or not. Is the action complete? — Verify repair — |