|
|
LOW & REVERSE BRAKE NHAT0188S05 Model code number 88X04 Number of drive plates 7 Number of driven plates 7 Drive plate thickness mm (in) Standard 1.8 (0.071) Allowable limit 1.6 (0.063) Clearance mm (in) Standard 1.7 - 2.1 (0.067 - 0.083) Allowable limit 3.3 (0.130) Thickness of retaining plates Thickness mm (in) Part number* 2.0 (0.079) 2.8 (0.110) 3.2 (0.126) 31667-80X00 *: Always check with the Parts Department for the latest parts information. BRAKE BAND NHAT0188S06 Anchor end pin tightening torque N·m (kg-m, in-lb) 4.0 - 5.8 (0.41 - 0.59, 36 - 51) Number of returning revolutions for anchor end pin 2.5 Lock nut tightening torque N·m (kg-m, ft-lb) 32 - 36 (3.2 - 3.7, 23 - 27) CLUTCH AND BRAKE RETURN SPRINGS NHAT0188S07 Unit: mm (in) Parts Part number* Free length Outer diameter Forward clutch (Overrun clutch) (22 31505-80X02 21.4 (0.843) 10.3 (0.406) High clutch (10 pcs) 31505-80X05 22.5 (0.886) 10.8 (0.425) Low & reverse brake (24 pcs) 31505-80X07 24.1 (0.949) 6.6 (0.260) *: Always check with the Parts Department for the latest parts information. Final Drive NHAT0189 DIFFERENTIAL SIDE GEAR CLEARANCE NHAT0189S01 Clearance between side gear and differential case with washer mm (in) 0.1 - 0.2 (0.004 - 0.008) DIFFERENTIAL SIDE GEAR THRUST WASHERS NHAT0189S02 Thickness mm (in) Part number* 0.75 (0.0295) 38424-81X00 *: Always check with the Parts Department for the latest parts information. GI MA EM LC EC FE AX SU BR ST RS BT HA SC EL IDX SERVICE DATA AND SPECIFICATIONS (SDS) Clutch and Brakes (Cont’d) AT-385 |