Infiniti FX35, FX50 (S51). Manual - part 5

ADP-12

< BASIC INSPECTION >

INSPECTION AND ADJUSTMENT

2.

Push setting button and hold for more than 10 seconds, then confirm blinking of the memory switch indi-
cator.

• Seat synchronization are ON: Memory switch indicator blink two times. 
• Seat synchronization are OFF: Memory switch indicator blink once.

>> END

6.

 WITH CONSULT-III - STEP 1

Select “Work support”.

>> GO TO 7.

7.

 WITH CONSULT-III - STEP 2

1.

Select “EXIT SEAT SLIDE SETTING”, “EXIT TILT SETTING” or “SEAT SLIDE VOLUME SET” then touch
display to change between ON and OFF. 

-

EXIT SEAT SLIDE SETTING: Entry/exit assist (seat)

-

EXIT TILT SETTING: Entry/exit assist (steering column)

2.

Then touch “OK”.

>> END

AUTOMATIC DRIVE POSITIONER SYSTEM

ADP-13

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

K

L

M

A

B

ADP

N

O

P

SYSTEM DESCRIPTION

AUTOMATIC DRIVE POSITIONER SYSTEM

AUTOMATIC DRIVE POSITIONER SYSTEM

AUTOMATIC DRIVE POSITIONER SYSTEM : System Diagram

INFOID:0000000005249623

JMJIA3537GB

ADP-14

< SYSTEM DESCRIPTION >

AUTOMATIC DRIVE POSITIONER SYSTEM

AUTOMATIC DRIVE POSITIONER SYSTEM : System Description

INFOID:0000000005249624

OUTLINE

The system automatically moves the driver seat, steering column and door mirror position by the driver seat
control unit and the automatic drive positioner control unit. The driver seat control unit corresponds with the
automatic drive positioner control unit by UART communication.

NOTE:
The lumbar support system and the side support system are controlled independently with no link to the auto-
matic drive positioner system.

Function Description 

Manual function

The driving position (seat, steering column and door mirror position) can be adjusted 
by using the power seat switch,  tilt & telescopic switch or door mirror remote control 
switch.

Seat synchronization function

The positions of the steering column and door mirror are adjusted to the proper posi-
tion automatically while linking with manual operation [seat sliding, seat lifting (rear) 
or seat reclining]. 

Memory function

The seat, steering column and outside mirror move to the stored driving position by 
pressing seat memory switch (1 or 2).

Entry/Exit assist function

Exit

On exit, the seat moves backward and the steering column moves upward and for-
ward.

Entry

On entry, the seat and steering column returns from exiting position to the previous 
driving position.

Intelligent Key interlock function

Perform memory operation, exiting operation and entry operation by Intelligent Key 
unlock operation or driver side door request switch unlock operation .

AUTOMATIC DRIVE POSITIONER SYSTEM

ADP-15

< SYSTEM DESCRIPTION >

C

D

E

F

G

H

I

K

L

M

A

B

ADP

N

O

P

AUTOMATIC DRIVE POSITIONER SYSTEM : Component Parts Location

INFOID:0000000005249625

1.

BCM  M118,  M119,  M122,  M123

2.

Automatic drive positioner control unit 
M51, M52

3.

Tilt motor M49

4.

Telescopic motor M49

5.

Unified meter and A/C amp. M67

6.

AV control unit
With NAVI M87, M88
Without NAVI M83, M85

7.

AT assembly connector F51

8.

Tilt & telescopic switch M31

9.

Door mirror remote control switch 
M26

10. Key slot M22

11.

Tilt sensor M48

12. Telescopic sensor M48

13. Seat memory switch D5

A.

Dash side lower (Passenger side)

B.

View with instrument driver lower 
panel removed

C.

View with steering column cover low-
er and upper removed

D.

Behind cluster lid C

E.

A/T assembly
(TCM is built in A/T assembly)

F.

View with instrument driver lower 
panel removed

G

View with steering column cover low-
er and upper removed

JMJIA1961ZZ