|
|
− 01 SJC8A00K77100090966FAAT00 − − − − − − − − DTC P0966: YES NO YES NO YES NO YES NO 14-145 A/T CLUTCH PRESSURE CONTROL Problem in A/T Clutch Pressure Control Solenoid Valve B Circuit NOTE: • Before you troubleshoot, record all freeze data and any on-board snapshot, and review General • This code is caused by an electrical circuit problem and cannot be caused by a mechanical problem in the 1. Clear the DTC with the HDS. 2. Start the engine, and wait for at least 1 second. 3. Check that DTC P0966 recurs. Go to step 7. Go to step 4. 4. Select CLUTCH PRESSURE CONTROL SOLENOID B in MISCELLANEOUS TEST MENU, and test A/T Go to step 5. Go to step 7. 5. Command A/T CLUTCH PRESSURE CONTROL SOLENOID VALVE B at 1.0 A in CLUTCH 6. Monitor the OBD STATUS for P0966 in the DTCs MENU with the HDS. Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals If the screen indicates FAILED, go to step 7. If the screen indicates NOT COMPLETED, return to 7. Turn the ignition switch to LOCK (0). 8. Disconnect the A/T clutch pressure control solenoid valve B connector. 9. Measure the resistance between A/T clutch pressure control solenoid valve B connector Go to step 10. Go to step 13. (cont’d) Terminal side of male terminals Is DT C P0966 indicated? Does the scr een indicate NORMAL? Does the scr een indicate PASSED? Is ther e 3 10 ? |