|
|
содержание .. 17 18 19 20 21 22 23 24 ..
Geely CK (2008). Manual part - 23
89 6. Separate the manual shift assembly from the transmission control cable assembly (1) Remove the E-shaped clip plate between the transmission control cable assembly and manual shift assembly (2) Remove the cotter pin and flat washer between the selector cable and shift assembly (3) Remove the locking nut connecting the cable and the shift assembly 7. Installation is in the reverse order of the above operation Notice: (1) All the E-shaped clip plate and lock pins should be assembled correctly. Otherwise, the shifting will be impacted. (2) The shift device cushion should be correctly assembled. Otherwise, it will affect the seal effect (3) Torque of the 4 nuts attaching the shift assembly to the floor: 20~25N.m (4) The set nut attaching the selector control cable to the shifter shall be adjusted properly (if the set nut is improperly adjusted, the shift operation will be affected), when in neutral shift, the shift lever shall be in correct position (you must check whether the shift control is flexible and reliable in the meantime), after the adjustment is completed, tighten the two nuts (5) Make sure the shift number words on the top of shift lever ball face towards the driving direction of the vehicle, properly tighten the set screw of the shift lever |