|
|
Back To Article
GENERAL INFORMATION Engine Performance Safety Precautions Always refer to Emission Decal in engine compartment before servicing vehicle. If instruction and decal differ, always use decal Do not allow or create a condition of misfire in more than one cylinder for an extended period of time. Damage to converter may occur Always turn ignition off and disconnect negative battery cable BEFORE disconnecting or connecting computer or other electrical DO NOT drop or shock electrical components such as computer, airflow meter, etc. DO NOT use fuel system cleaning compounds that are not recommended by the manufacturer. Damage to gaskets, diaphragm materials Before performing a compression test or cranking engine using a remote starter switch, disconnect coil wire from distributor and secure it Before disconnecting any fuel system component, ensure fuel system pressure is released. Use a shop towel to absorb any spilled fuel to prevent fire. DO NOT create sparks or have an open flame near battery. If any fuel system components such as hoses or clamps are replaced, ensure they are replaced with components designed for fuel system Always reassemble throttle body components with new gaskets, "O" rings and seals. If equipped with an inertia switch, DO NOT reset switch until fuel system has been inspected for leaks. Wear safety goggles when drilling or grinding. Wear proper clothing which protects against chemicals and other hazards. Copyright 2009 Mitchell Repair Information Company, LLC. All Rights Reserved.
Article GUID: A00002342 |