|
|
TEST ACTION APPLICABILITY 19 Turn the ignition off. All Yes → No → Repair open Ground Circuit at S/C Servo Connector. 20 Turn the ignition on. t in Inputs/Outputs, read the P/N Switch state. While observing the display, move the Gear Selector to DRIVE. t show P/N switch 9D/R9? All Yes → No → 21 Turn the ignition on. t in Inputs/Outputs, read the Speed Control Set Switch state. While observing the display, press the Set Switch several times. t show the Set Switch status change appropriately from Pressed to Released? All Yes → No → Replace the Left S/C Switch. 22 Turn the ignition off. All Yes → Repair as necessary. No → 23 Turn the ignition on. t in Inputs/Outputs, read the Speed Control Resume Switch state. While observing the display, press the Resume Switch several times. t show the Resume Switch status change appropriately from Pressed to Released? All Yes → No → 24 Turn the ignition on. t in Inputs/Outputs, read the Speed Control Cancel Switch state. While observing the display, press the Cancel Switch several times. t show the Cancel Switch status change appropriately from Pressed to Released? All Yes → No → Replace the Right S/C Switch. 236 SPEED CONTROL *CHECKING SPEED CONTROL OPERATION WITH NO DTC’S PRESENT Continued |