|
|
6D – 16 MANUAL STEERING GEAR D15B720A 5. Install the tie rod. D Install the shock damper ring to the rack gear (1). D Vise the rack gear (2). Important : Clothe the rack gear with a cloth before vis- Notice: Do not vise the rack gear above two teeth face. D Coat the teeth face of the tie rod with Loctitte. D Install the tie rod (3). Tighten Tighten the tie rod to 80–120 N S m (59–89 lb-ft). D105B721 6. Install the shock damper ring to the tie rod ball joint. a. Tie rod ball joint. D Coat the tie rod ball joint with grease. D105B722 7. Install the rack and pinion boot. D Install the rack and pinion boot (1). D Install the rack and pinion boot wire clamp (2). D Install the rack and pinion boot clamp (3). 8. Install the tie rod end. Refer to “Tie Rod End” in this 9. Install the rack and pinion steering gear assembly to 10. Adjust the free load of the steering gear. Refer to “Diagnosis” in this section. |