|
|
© 200515 1-1 Specifications FLUIDS, OIL AND LUBRICANTS ΛΦ45/55 series 3 1. SPECIFICATIONS 1.1 GENERAL IN ORDER TO SATISFY THE WARRANTY CONDITIONS AND GUARANTEE THE LIFESPAN, SAFETY AND RELIABILITY OF DAF PRODUCTS, IT IS OF THE UTMOST IMPORTANCE THAT THE CORRECT FLUIDS, OIL AND LUBRICANTS, COOLANT AND FUEL ARE USED AND THAT THE REQUIRED REPLACEMENT INTERVALS ARE OBSERVED. Lubricant, engine coolant and fuel additives - of whatever type - must not be used except in those circumstances specified by DAF. Always follow the safety instructions below and the instructions that are supplied with the product. Ask your lubricant and fuel supplier(s) whether the products supplied comply with DAF specifications. DAF is not liable for damage or problems in the following instances: 1. use of oil of a lower grade than specified. 2. use of oil of a different viscosity than specified. 3. if the change interval is exceeded. 4. if fuel, lubricants or coolants have been used which do not meet the requirements specified by DAF. Avoid contact with: Lubricants Coolant Fuel Clutch fluid In the event of contact with the skin: remove the liquid with paper or a cloth, wash with soap and water. If irritation persists, consult a doctor. In the event of contact with the eyes: remove with a cloth and rinse with water. If irritation persists, consult a doctor. If swallowed: DO NOT induce vomiting. Rinse mouth, drink two glasses of water and consult a doctor. In the event of inhalation: get fresh air and rest. Note: Refer to the "Fluids and lubricants" specification manual for the prescribed fluid, oil and lubricant specifications. } |