|
|
|
© 200515 3-5 Drive shafts, drive and chassis TECHNICAL DATA ΛΦ45/55 series 0 Rear axles (1) Retighten after 100 km. (2) Evenly tighten the two U-bolt nuts alternately. 1132 rear axle Differential Drive shafts M18 x 1.5 wheel nut (LF 45 version 6/8 ton GVW) 370 Nm M20 x 1.5 wheel nut (LF 45 version 10/11/12 ton GVW) 485 Nm M20 x 1.5 wheel nut (LF 55 version 13/14/15 ton GVW) 485 Nm M22 x 1.5 wheel nut (LF 55 version 18 ton GVW) 700 Nm LF 45 U-bolt nut 470 Nm U-bolt nut, LF 55 version 13/14/15 ton GVW 470 Nm U-bolt nut, LF 55 version 18 ton GVW 700 Nm Filler and drain plugs/hub plugs (Torx) 85 Nm Locking nut of crown wheel guide bolt 110 Nm Differential drain plug 54 Nm 5/16" UNF clamping bracket 38 Nm Retightening torque 36 Nm 3/8" UNF clamping bracket 70 Nm Retightening torque 67 Nm |