|
|
TEST ACTION APPLICABILITY 3 Turn the ignition off. All Yes → Go To 4 No → Repair the Driver Blend Door Driver (A) and (B) circuits for a short together. t, reset the ATC after repair is complete. Perform BODY VERIFICATION TEST - VER 1. 4 Turn the ignition off. All Yes → Go To 5 No → Repair the Driver Blend Door Driver (A) circuit for an open. With the DRBIII t, reset the ATC after repair is complete. Perform BODY VERIFICATION TEST - VER 1. 5 Turn the ignition off. All Yes → Go To 6 No → Repair the Driver Blend Door Driver (B) circuit for an open. With the DRBIII t, reset the ATC after repair is complete. Perform BODY VERIFICATION TEST - VER 1. 6 Turn the ignition off. All Yes → Replace the ATC. With the DRBIII t, reset the ATC after repair is complete. Perform BODY VERIFICATION TEST - VER 1. No → Go To 7 7 If there are no possible causes remaining, view repair. All Repair Replace the Driver Blend Door Actuator. t, reset the ATC after repair is complete. Perform BODY VERIFICATION TEST - VER 1. 333 AUTOMATIC TEMPERATURE CONTROL DRIVER BLEND DOOR NOT RESPONDING (ACTIVE) — Continued |