|
|
TEST ACTION APPLICABILITY 19 Using the schematics as a guide, inspect the wiring and connectors. Repair as All Repair Replace the Powertrain Control Module per the Service Informa- t PERFORM QUICK LEARN AND REPROGRAM PINION FACTOR. 20 If there are no possible causes remaining, view repair. All Repair Adjust the Shift Linkage and/or cable per the Service Information. 21 The conditions necessary to set the DTC are not present at this time. t, check the EATX EVENT DATA to help identify the conditions in which the DTC was set. All Yes → Repair as necessary. Perform 40/41TE (NGC) TRANSMISSION VERIFICATION No → Test Complete. 36 TRANSMISSION - NGC P0706-CHECK SHIFTER SIGNAL — Continued |