|
|
TEST ACTION APPLICABILITY 3 Disconnect the Driver Recliner Seat Position Sensor connector. All Yes → Repair the Driver Seat Sensor 5 Volt Supply circuit for a short to battery. No → Go To 4 4 Turn ignition off. All Yes → Repair the Driver Seat Recliner Position Signal circuit for a short to voltage. No → Go To 5 5 Turn ignition off. t in MHSAPM Sensors Read the Driver Recliner Seat Position Sensor voltage. All Yes → Go To 6 No → Replace the Seat Back Assembly. Perform POWER SEAT SYSTEM VERIFICATION TEST - VER 1. 6 Ensure all seat and sensor connectors are connected and Recliner motor is opera- t in MHSAPM Sensors monitor the Driver Seat Recliner Sensor while operating the seat Recliner motor to both limits. All Yes → Replace the Seat Back Assembly. Perform POWER SEAT SYSTEM VERIFICATION TEST - VER No → Go To 7 7 If there are no possible causes remaining, view repair. All Repair Replace the Memory/Heated Seat Adjustable Pedal Module. 981 POWER SEATS DRIVER RECLINER SENSOR OUT OF RANGE HIGH - MHSAPM — Continued |