|
|
Fitting of the fastening nuts in the case of accident repairs or replacement of the main headlights Adjust fastening nuts to the same height as the old unit and tighten gently by hand. Mounting plate removed 1. Adjust fastening nuts to the same height as the old unit and tighten gently by hand. 2. Press headlight housing firmly into the body and lock. 3. After adjustment, tighten the fastening nuts. → Tightening torque: 6 ftlb. +/-1.5 ftlb. Subsequent work Subsequent work - headlight mounts Install front wheel housing liner. → 505619 Removing and installing front wheel housing liner - Diagnostic system: reading out fault memory and activating systems Testing and adjusting headlight mount 4013 |