|
|
Subsequent work for spray nozzle of headlight washer system 1. Install fog lights. → 23 Removing and installing fog lights - chapter on "Installing" 2. Install front apron. → N0 Removing and installing front apron - chapter on "Installing" 3. Bleed the spray nozzles. The system is bled by activating the spray nozzles for the headlight washer multiple times. Depending on whether it is a left or right spray nozzle, or whether the water reservoir for Removing and installing spray nozzle head Removing spray nozzle head Pulling out spray nozzle 1. Insert an angled scriber, for example, into the opening on the nozzle head and pull the spray nozzle up and out. The nozzle head is released from the spray nozzle and the spray nozzle moves back into place. Installing spray nozzle head Diagnostic system: reading out fault memory and activating systems Subsequent work for spray nozzle of headlight washer system 3989 |