Porshe 911 (997). Manual - part 802

Installation position of padding

Note

Sealing surface of padding must be clean and free of grease.

Diagnostic system: reading out fault memory and activating systems

Installing padding for front backrest

3365

Applying adhesive

1. Apply adhesive -1- to the marked area of the padding -2- .

Installing padding

2. Place padding -2- on the cushion carrier -3- and align it with the cushion carrier.

3. Engage padding -1- in the cushion carrier at the sides.

Securing wire harness for backrest seat heating

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Securing wire harness for backrest seat heating

3366

Installation position of padding

Note

Make sure not to trap or damage the wire harness when pulling it through.

Diagnostic system: reading out fault memory and activating systems

Securing wire harness for backrest seat heating

3367

Pulling wire harness through

Note

Only for vehicles with heated seats.

1. Pull wire harness through the seat and backrest

frame.

Securing wire harness on seat frame

2. Secure wire harness on seat frame.

2.1. Connect electric plug connection -3- for backrest seat heating -arrows A- .

2.2. Engage wire harness -2- ( -arrow C- ) and secure with new tie-wraps -1- .

Securing wire harness on backrest frame

3.

Diagnostic system: reading out fault memory and activating systems

Securing wire harness for backrest seat heating

3368