Porshe 911 (997). Manual - part 781

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  779  780  781  782   ..

 

 

Porshe 911 (997). Manual - part 781

 

 

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Subsequent work

3281

- Preliminary work
- Removing locking mechanism for rear backrest
- Installing locking mechanism for rear backrest
- Subsequent work

Preliminary work

Preliminary work

Remove rear backrest. → 724719 Removing and installing rear backrest - section on "Removing"

Removing locking mechanism for rear backrest

Removing locking mechanism for rear backrest

Removing control button

1. Press out control button -1- with a screwdriver.

2. Unscrew fastening screws -2- and remove collar -3- .

3282

Removing cover for lock

3. Unscrew fastening screws -1- and remove cover for lock -2- .

Loosening cover

4. Remove protection washer -1- ( -arrow A- ).

5. Press out cover for backrest -2- at the sides with a screwdriver -arrows B- .

Removing lock

6. Fold padding -1- inwards -arrow A- .

7. Press reset spring -2- together -arrows B- and remove upwards.

Diagnostic system: reading out fault memory and activating systems

Removing locking mechanism for rear backrest

3283

8. Unclip cover -3- .

9. Unscrew fastening screws -4- and remove lock for backrest -5- by pulling it upwards -arrow C-

.

Installing locking mechanism for rear backrest

Installing locking mechanism for rear backrest

Installing lock

1. Position lock for backrest -5- on the backrest frame -arrow A- and screw in the fastening screws -4- .

Tightening torque → Tightening torque: 12 (9 ftlb.) Nm +/-2 (1.5) Nm

2. Clip in cover -3- .

3. Press in reset spring -2- until it engages -arrows B- and check lever function.

Diagnostic system: reading out fault memory and activating systems

 Installing locking mechanism for rear backrest

3284

 

 

 

 

 

 

 

Content   ..  779  780  781  782   ..