Porshe 911 (997). Manual - part 685

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  683  684  685  686   ..

 

 

Porshe 911 (997). Manual - part 685

 

 

Electrical lead for side airbag

2. Pull the side airbag out from the backrest

frame.

3. Undo and remove the fastening nut -2- .

4. Unlock the electrical connector for the side airbag -3- and remove

-A-

 .

Installing side airbag

Installing side airbag

Electrical lead for side airbag

Diagnostic system: reading out fault memory and activating systems

Removing side airbag

2897

1. Push on the electrical connector for the side airbag -3- and lock.

2. Fit the ground lead -2- and tighten with fastening nut. → Tightening torque: 7 ftlb.

3. Insert side airbag into backrest frame and counter.

Mounting of side airbag

4. Lift the appropriate loosened side bolster and tighten the two fastening screws -1- . → Tightening torque:

7 ftlb.

Reworking

Work in wake of side airbag

1. Fasten covering for front backrest. → 741919 Removing and installing covering for front backrest [997310

997311 997320 997321 997610 997611 997620 997621]→ 741919 Removing and installing covering for
front backrest [997110 997111 997120 997121 997410 997411 997430 997431]

2. Install heating element for front seat backrest. → 741919 Removing and installing covering for front

backrest [997310 997311 997320 997321 997610 997611 997620 997621]→ 741919 Removing and
installing covering for front backrest [997110 997111 997120 997121 997410 997411 997430 997431]

3. Connect the seat to the power supply. →   Removing and installing front seat or Connecting battery → 

 Work instructions after disconnecting the battery.

997110, 997111, 997120, 997121, 997310, 997311, 997320, 997321, 997410, 997411, 997430, 997431,
997610, 997611, 997620, 997621

Diagnostic system: reading out fault memory and activating systems

Installing side airbag

2898

WARNUNG

Gefahr des Verlusts der Text-Bild-Zuordnung beim Ausdruck.

Aus technischen Gründen kann derzeit nicht ausgeschlossen werden, dass trotz
einwandfreier Darstellung auf dem Bildschirm beim Ausdruck der
Zusammenhang von Text und zugehörigem Bild verloren geht.

• 

Wird der Fehler nicht bemerkt, besteht die Gefahr, daß Arbeiten nicht korrekt
durchgeführt werden und es dadurch zu Personen- und Sachschäden kommt.

• 

→ Vergleichen Sie deshalb nach dem Druckvorgang unbedingt die Ausdrucke mit der
Bildschirmdarstellung. Korrigieren Sie die Ausdrucke im Fehlerfall so, daß der Inhalt der
Bildschirmdarstellung zutreffend wiedergegeben wird.

WARNING

Danger of losing text-figure correspondence when printing out.

For technical reasons, it can currently not be ruled out that the correspondence
between text and associated figure can be lost when it is printed out, even though
the display on the screen is correct.

• 

If the fault is not noticed, there is the danger that work will not be performed
correctly which can cause injury and damage.

• 

→ Therefore, always compare printouts with the screen display after printing them out. Correct
the printouts if they are faulty so that the content of the screen display matches that on the
printouts.

AVERTISSEMENT

Risque de perte de la correspondance texte-illustration lors de l'impression papier.

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

Diagnostic system: reading out fault memory and activating systems

Work in wake of side airbag

2899

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Work in wake of side airbag

2900

 

 

 

 

 

 

 

Content   ..  683  684  685  686   ..