Polaris ACE 150 EFI (2018 year). Manual - part 7

33

FEATURES AND CONTROLS

Cab Nets

Riding in this vehicle without using the cab nets increases the risk of 

serious injury or death in the event of an accident or rollover. 

Cab nets must be used by the operator at all times. Make sure all 

latches are secure before operating the vehicle.
Always inspect cab nets for tightness, wear and damage before each 

use of the vehicle. Use the strap adjusters to tighten any loose straps. 

Promptly replace worn or damaged cab nets with new cab nets, 

available from your authorized POLARIS dealer.

Screw

Adjusters/Latches

34

FEATURES AND CONTROLS

Fuel Cap

Never allow a child to refuel or handle 

gasoline.

The fuel tank filler cap is located on the 

left-hand side of the vehicle. 
Use POLARIS Carbon Clean fuel 

treatment at each fill. Follow the mixing 

directions on the container. See page 102 

for the part numbers of POLARIS 

products.
When refueling, always use either leaded 

or unleaded gasoline with a minimum pump octane number of 87 

R+M/2 octane. Non-ethanol fuel is recommended. Do not use fuel 

with ethanol content greater than 10 percent, such as E-85 fuel.

Fuel Cap

35

FEATURES AND CONTROLS

Ignition Switch

The ignition switch is a three-position, 

key-operated switch. Use the ignition 

switch to start the engine. See page 45 

for starting procedures.
The key can be removed from the switch 

when it is in the OFF position.

OFF

The engine is off. Electrical circuits are off, except accessory 

12V.

ON

Electrical circuits are on. Electrical equipment can be used.

START

Turn the key to the START position to engage the electric 

starter. The key returns to the ON position when released.

Ignition Switch

36

FEATURES AND CONTROLS

Gear Selector

F: Forward
N: Neutral
R: Reverse
The gear selector is located to the 

right of the seat. To change gears, stop 

the vehicle, and with the engine 

idling, move the lever to the desired 

gear. Do not attempt to shift gears 

with engine speed above idle or while 

the vehicle is moving.

Tip: Maintaining shift linkage adjustment is important to assure proper 

transmission function. Your POLARIS dealer can assist in resolving any 

shifting problems.

NOTICE: Do not attempt to shift the transmission while the vehicle is moving 

or damage to the transmission could result. Always shift when the 

vehicle is stationary and the engine is at idle.

Gear Selector