|
|
|| DRIVER SUPPORT 306 To temporarily deactivate Adaptive Cruise Control – Press the button on the steering wheel (2). symbol in the instrument panel changes color from WHITE to GRAY and WARNING • If Adaptive Cruise Control is in standby • If the vehicle comes too close to a vehicle Standby mode due to action by the driver Adaptive Cruise Control will be temporarily deac- • the brakes are applied • the gear selector is moved to N • the vehicle is driven faster than the set Temporarily increasing speed using the accelera- Automatic standby mode Adaptive Cruise Control is dependent on other 45 ). If any of these other systems stops working, Adaptive Cruise Control will automati- WARNING With automatic standby mode, the driver is warned by an acoustic signal and a message on the instrument panel. • The driver must then regulate vehicle Adaptive Cruise Control may go into standby • your vehicle's speed goes below 5 km/h • your vehicle's speed goes under 5 km/h • the driver opens the door. • the driver unbuckles the seat belt. • the engine speed (rpm) is too low/high. • one or more of the wheels lose traction. • the brake temperature is high. • the parking brake is applied. • the camera/radar sensor is covered by snow Reactivating Adaptive Cruise Control Note: This illustration is general and details may vary 45 Electronic Stability Control |