|
|
Content .. 1025 1026 1027 1028 ..
01-21
- If a malfunction is determined when performing Output DTM, exchange instrument cluster.
- If no malfunction is determined when performing Output DTM, check wiring and connections to
Output Diagnostic Test Mode (DTM), initiating
Notes:
Output Diagnostic Test Mode (DTM) cannot be initiated, or will be interrupted if engine is
Us the -C- button to exit the test sequence at any time.
- Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch on ignition
- Press -Q- button to confirm input.
- Press button until "Select function"is shown in display. Rapid data transfer HELP Select function XX Indicated on display: - Press buttons -0- and -3- to select "Output Diagnostic Test Mode" function 03. Rapid data transfer Q 03 - Output Diagnostic Test Mode Indicated on display Instrument cluster through m.y. 1999, On Board Diagnostic (OBD) 13/2/2005 |