|
|
142 3-2. Opening, closing and locking the doors ■ Switching the door unlock function It is possible to set which doors the entry function unlocks using the wireless Turn the power switch off. When the indicator light on the key surface is not on, press and hold , or for approximately 5 seconds while pressing and holding . The setting changes each time an operation is performed, as shown below. .) To prevent unintended triggering of the alarm, unlock the doors using the is pressed, the doors will be locked again and the alarm will automatically be ■ Impact detection door lock release system In the event that the vehicle is subject to a strong impact, all the doors are ■ Open door warning buzzer If the vehicle reaches a speed of 3 mph (5 km/h), the master warning light ■ Using the mechanical key The doors can also be locked and unlocked with the mechanical key. 1 2 2 Multi-information display Unlocking function Beep Holding the driver’s door Exterior: Beeps 3 Holding the front passen- Holding either front door Exterior: Beeps twice |