Toyota Tundra (2015 year). Manual - part 15
Last Modified: 9-16-2014
6.6 D
Doc ID: RM000000UYZ056X
Model Year: 2015
Model: Tundra
Prod Date Range: [08/2014 - ]
1. PROCEDURES NECESSARY WHEN BATTERY TERMINAL IS DISCONNECTED / RECONNECTED
Procedures Necessary when Cable is Disconnected/Reconnected to Battery Terminal
NECESSARY PROCEDURE
EFFECT OR INOPERATIVE FUNCTION WHEN NECESSARY
PROCEDURE IS NOT PERFORMED
SEE
PAGE
Gain acquisition mode and trailer
brake type setting
Initial value Gain value is set to 5.0 (initial value)
NOTICE:
After the ignition switch is turned off, the navigation system requires approximately a minute to record
PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED
REPLACEMENT PART
NECESSARY PROCEDURES
EFFECTS / INOPERATIVE FUNCTIONS
WHEN NECESSARY PROCEDURES
ARE NOT PERFORMED
SEE PAGE
for 1UR-FE:
Throttle body
assembly
Cleaning the
deposits from the
throttle body
assembly
Engine assembly
Cylinder head
sub-assembly
Camshaft (for
intake or exhaust
camshaft)
Camshaft timing
gear assembly
Camshaft timing
exhaust gear
assembly
Piston or piston
ring
Mass air flow
meter
sub-assembly
Fuel injector
Initialization
Engine control system