|
|
2C-28 Rear Suspension: 7) Install rear wheel hub assembly referring to “Rear Wheel Hub Assembly Removal and Installation”. 8) Fill reservoir with brake fluid and bleed brake system. Refer to “Air Bleeding of Brake System in 9) Upon completion of all jobs, depress brake pedal with about 30 kg (66 lbs) load a few times so as to 10) Install rear wheels. 11) Check to ensure that brake drum is free from dragging and proper braking is obtained. 12) Lower hoist and tighten rear wheel bolts to specified torque. Tightening torque 13) Bounce vehicle up and down to stabilize suspension. weight on suspension. NOTE
Tightening torque 15) Perform brake test (foot brake and parking brake). For check and adjustment procedures, refer to “Rear Rear Suspension Knuckle Check S6JB0B2306029 • Inspect for cracks, deformation or damage. faulty condition is found, replace rear suspension Rear Suspension Fasteners Check S6JB0B2306030 Check each bolt and nut fastening suspension parts for I5JB0A230078-01 |