Subaru Legacy IV (2008 year). Manual - part 1154

CC-9

Inhibitor Switch

CRUISE CONTROL SYSTEM

7. Inhibitor Switch

A: NOTE

1. 4AT MODEL

For the inhibitor switch, refer to 4AT section. <Ref.
to 4AT-46, INSPECTION, Inhibitor Switch.>

2. 5AT MODEL

Inhibitor switch cannot be removed and checked,
because the inhibitor switch is installed on control
valve assembly.
When a malfunction occurs, refer to 5AT (diag)
section. <Ref. to 5AT(diag)-35, DTC P0705
TRANSMISSION RANGE SENSOR CIRCUIT
(PRNDL INPUT), Diagnostic Procedure with Diag-
nostic Trouble Code (DTC).>

CC-10

Transmission Control Module (TCM)

CRUISE CONTROL SYSTEM

8. Transmission Control Module 

(TCM)

A: NOTE

For the transmission control module (TCM), refer to
the following section.
• 4AT model <Ref. to 4AT-61, Transmission Con-
trol Module (TCM).>
• 5AT model <Ref. to 5AT-60, Transmission Con-
trol Module (TCM).>

CC-11

Neutral Position Switch

CRUISE CONTROL SYSTEM

9. Neutral Position Switch

A: NOTE

For the neutral position switch, refer to the following
section.
• 5MT model <Ref. to 5MT-35, Switches and Har-
ness.>
• 6MT model <Ref. to 6MT-41, Neutral Position
Switch.>

CC-12

Neutral Position Switch

CRUISE CONTROL SYSTEM