Peugeot Expert Tepee (2014 year). Instruction

9.13

Select "

Select destination " and

conﬁ rm, then select "

GPS coordinates "

and conﬁ rm.

Enter the GPS coordinates and

conﬁ rm "

OK " to start the guidance.

Press

NAV to display the

Navigation - guidance " menu.

NAVIGATION - GUIDANCE

TOWARDS GPS COORDINATES

TOWARDS A POINT ON THE MAP

With the map displayed, press

OK to

display the contextual menu. Select

Move the map " and conﬁ rm.

Press

OK to display the contextual

menu for "

Move the map " mode.

Select "

Select as destination " or

Select as stage " and conﬁ rm.

Move the cursor using the control to

identify the desired destination.

9.14

05 NAVIGATION - GUIDANCE

The points of interest (POI) indicate all of the service locations in the vicinity

(hotels, various businesses, airports...).

Select the "

Enter an address " function

and conﬁ rm, then select "

Select

destination " and conﬁ rm.

To select a POI close to your current

location, select "

POI " and conﬁ rm, then

select "

Around the current place " and

conﬁ rm.

To select a POI as a stage on the route,

select "

POI " and conﬁ rm, then select " On

the route " and conﬁ rm.

To select a POI as a destination, ﬁ rst

enter the country and town (see "Towards

a new destination"), select "

POI " and

conﬁ rm, ﬁ nally select "

Near " and conﬁ rm.

Near

Search for POIs in the categories

suggested in the following pages.

Select "

Search by Name " to search for POIs by name and not by

proximity.

Select the POI and conﬁ rm "

OK " to start

the guidance.

Press

NAV to display the

Navigation - guidance " menu.

9.15

LIST OF PRINCIPAL POINTS OF INTEREST (POI)

NAVIGATION - GUIDANCE

This icon appears when several POIs are grouped

together in the same area. Zooming in on this icon

shows details of the POIs.

* According to availability in the

country.

The detailed procedure for updating POIs can be found at "http://peugeot.navigation.com".

9.16

05 NAVIGATION - GUIDANCE

ALERT PARAMETERS

RISK AREAS

Select:

"Visual alert"

"Audible alert"

"Alert only in guidance"

"Overspeed alarm only".

The choice of time of notiﬁ cation deﬁ nes

how long in advance that Risk area

warnings are given.

Select "

OK " to conﬁ rm the screen.

Select "

Guidance options " and conﬁ rm,

then select "

Set parameters for risk

areas " and conﬁ rm.

These functions are only available if risk areas have been

downloaded and installed on the system.

The detailed procedure for updating risk area POIs can be found at

www.peugeot.com.

Press

NAV to display the " Navigation -

guidance " menu.

9.17

05 NAVIGATION - GUIDANCE

ADDING A STAGE

Press

NAV to display the

Navigation - guidance " menu.

Select "

Journey leg and route " then

conﬁ rm.

Select "

Close to " a route passing

close to the stage or "

Strict " for a route

passing through the stage.

Conﬁ rm "

OK " to start the guidance, and

give a general indication of the guidance

route.

Select "

Add a stage " then conﬁ rm

The address of the stage is entered as

a destination, by "

Enter an address ",

a contact in "

Directory ", or " Previous

destinations ".

ORGANISING STAGES

To organise stages, carry out

operations 1 to 2 again, then select

Order/delete journey legs " and

conﬁ rm.

Select and conﬁ rm to save

the modiﬁ cations.

Select the stage that you want to move

in the order.

Select "

Delete " to delete the stage.

9.18

05 NAVIGATION - GUIDANCE

ROUTE OPTIONS

CALCULATION CRITERIA

Select "

Guidance options " and conﬁ rm.

Select "

OK " and conﬁ rm to save

the modiﬁ cations.

Select "

Deﬁ ne calculation criteria " and

conﬁ rm.

This function allows modiﬁ cation of:

the guidance criteria: ("

Fastest

route ", " Shortest route ",

Distance/Time "),

the exclusion criteria: ("

With tolls "

or "

With Ferry "),

- trafﬁ c avoidance: ("

Trafﬁ c info ").

Press

NAV to display the

Navigation - guidance " menu.

If trafﬁ c avoidance (Trafﬁ c info) is selected, the system suggests

an alternative route if there is a delay on the guidance route.

9.19

Press

NAV to display the

Navigation - guidance " menu.

MAP MANAGEMENT

SELECTING THE POINTS OF INTEREST DISPLAYED ON THE MAP

Select "

Map management " and conﬁ rm.

Select from the various categories

the ones that you want to display on

the screen.

Select "

Map details " and conﬁ rm.

Select "

By default " to have only " Oil stations, garages " and

Accident-prone area " appear on the map (if installed in

the system).

Select "

OK " then conﬁ rm and select

OK " again then conﬁ rm to save

the modiﬁ cations.

9.20

05 NAVIGATION - GUIDANCE

Select "

Map management " and conﬁ rm.

Select:

Vehicle direction " to have the map

follow the direction of travel,

North direction " to keep the map

always North up,

Perspective view " to display a

perspective view.

Select "

Map orientation " and conﬁ rm.

The colour of the map, different from the day and night mode, is

conﬁ gured in the "

SETUP " menu.

MAP ORIENTATION

Press

NAV to display the

Navigation - guidance " menu.

Street names are visible on the map from the 100 m scale.

9.21

05 NAVIGATION - GUIDANCE

Press

NAV to display the

Navigation - guidance " menu.

ADJUSTING THE GUIDANCE SPEECH SYNTHESIS

Select "

Guidance options " and conﬁ rm.

ADJUSTING THE VOLUME/DEACTIVATION

Select "

Set speech synthesis " and

conﬁ rm.

Select the volume graph and conﬁ rm.

Select "

Deactivate " to deactivate voice messages.

Select "

OK " and press the dial

to conﬁ rm.

Adjust the volume to the desired level

and conﬁ rm.

The volume of messages can be adjusted during the transmission

of the message using the volume adjustment control.

The volume setting of guidance messages is also accessible via the

SETUP " / " Voice synthesis " menu.

9.22

MALE VOICE / FEMALE VOICE

Press

SETUP to display the

conﬁ guration menu.

Select "

Select male voice " or " Select

female voice " then conﬁ rm " Yes

" then conﬁ rm "

to activate a male or female voice.

The system restarts.

Select "

Voice synthesis " and conﬁ rm.

9.23

06 TRAFFIC INFORMATION

Access to the "TRAFFIC INFORMATION" menu

Go from the list to the menu (left/right).

" " " " " " " " " " " " " " " " " "

Trafﬁ c information

Trafﬁ c information " " " " " " " " " " " " " " " " " "

Press "

TRAFFIC ".

9.24

06 TRAFFIC INFORMATION

CONFIGURE THE FILTERING AND DISPLAY OF TMC MESSAGES

TMC (Trafﬁ c Message Channel) messages contain information on trafﬁ c and weather conditions, received in real time and transmitted to the

driver in the form of audible announcements and symbols on the navigation map.

The navigation system can then suggest an alternative route to avoid a trafﬁ c problem.

Press the

TRAFFIC button to display the

Trafﬁ c information menu.

Select the "

Geographic ﬁ lter " function

Geographic ﬁ lter

and conﬁ rm.

The system offers a choice of:

Retain all the messages ",

Retain the messages "

● "

Around the vehicle ", (conﬁ rm

the mileage to modify and select

the distance),

● "

On the route ".

Conﬁ rm "

OK " to save the modiﬁ cations.

We recommend:

- a ﬁ lter on the route and

- a ﬁ lter around the vehicle of:

- 12 miles (20 km) in urban areas,

- 30 miles (50 km) on motorways.

9.25

06 TRAFFIC INFORMATION

PRINCIPAL TMC SYMBOLS

Red and yellow triangle: trafﬁ c information, for example:

Black and blue triangle: general information, for example:

RECEIVING TA MESSAGES

The TA (Trafﬁ c Announcement) function gives priority to TA alert

messages. To operate, this function needs good reception of a

radio station transmitting this type of message. When a trafﬁ c report

is transmitted, the current audio source (Radio, CD, USB, ...) is

interrupted automatically to play the TA message. Normal playback

of the audio source resumes at the end of the transmission of

the message.

Press

RADIO to display the " FM / AM

band " menu.

Select "

Guidance options " then

conﬁ rm.

Activate or deactivate "

TA " then conﬁ rm.

The volume setting for TA messages can be adjusted only during the

transmission of this type of alert.

Activate or deactivate the function at any time by pressing the button.

During a message, press the button to interrupt it.

9.27

07 USING THE TELEPHONE

Access to the "TELEPHONE" menu

" " " " " " " " " " " " " " " " " "

Telephone

Telephone " " " " " " " " " " " " " " " " " "

Go from the list to the menu (left/right).

Press

PHONE .

To make a call, select a number in the list and conﬁ rm "

OK "

to start the call.

Connecting a different telephone deletes the list of

recent calls.

No telephone connected.

Telephone connected.

Incoming call.

Outgoing call.

Synchronisation

of address book in

progress.
Telephone call in

progress.

In the top bar of the permanent

display

9.28

PAIRING A BLUETOOTH

TELEPHONE

FIRST CONNECTION

For reasons of safety and because they require prolonged attention

on the part of the driver, the operations for pairing the Bluetooth

mobile telephone to the hands-free system of the audio unit must be

carried out with the

vehicle stationary .

Activate the telephone's Bluetooth

function and ensure that it is "shown to

all" (telephone conﬁ guration).

Press this button.

Select the name of the desired

peripheral from the list of devices

detected then select "

Connect " and

conﬁ rm.

The system offers to connect the

telephone:

in "

Hands-free mode " (telephone

only),

in "

Audio " mode (streaming: playing

music ﬁ les on the telephone),

or "

All " (for selection of both modes).

Select "

OK " and conﬁ rm.

Select "

Bluetooth functions " and

conﬁ rm.

Select "

Peripherals search " and

conﬁ rm.

The list of peripherals detected is

displayed. Wait until the "

Connect "

button is available.

USING THE TELEPHONE

Visit www.peugeot.co.uk for more information (compatibility,

additional help, ...).

Peugeot Expert Tepee (2014 year). Instruction - part 12