|
|
7 Practical information 287 3008-2_en_Chap07_infos-pratiques_ed01-2016 Fitting the towball F Below the rear bumper, unclip and remove the protective plug from the carrier. F On the towball, push the latch to the left and hold it in this position. F At the same time press the trigger forward to release the mechanism (position B). F Insert the end of the towball into the carrier, pushing it in as far as it will go. F Ensure that the two pins are in contact with the cut-outs in the carrier, that the trigger F Insert the key in the lock and turn it to the right. F Remove the key from the lock. by rotating it to the left. |