|
|
1B–74 AIR CONDITIONING FUNCTIONS AND FEATURES • Automatic interior temperature control This function enables to maintain the interior temperature at the level specified from the temperature • Maximum cooling and heating function You can select FC (Full cool, namely maximum cooling temperature) or FH (Full heat, maximum heating • Automatic air flow control Air flow is automatically and consecutively fine tuned according to the specified interior temperature and • Mode (blow port) control This function automatically selects either one of the VENT, BI-LEVEL, FOOT or DEP mode for the blow • Intake (switching between the fresh air intake and circulation of interior air) control The intake (switching between fresh air intake and circulation of interior air) mode automatically selects • Cooler start-up timing control This function is used for maintaining the air flow at "LOW" level until the evaporator is sufficiently cooled • Heater start-up timing control This function is used for maintained the air flow at "LOW" level and also for maintaining the defrost • Solar radiation quantity offset control The photodiode on the solar radiation sensor determines solar radiation quantity accurately to offset • Switch position storing function This function is used for storing switch positions being selected in the immediately preceding operation, • Self-diagnosis function The self-diagnosis function turned on from the panel switch makes your troubleshooting easier (for detail |