|
|
6E–110 4JX1–TC ENGINE DRIVEABILITY AND EMISSIONS DTC P1217 – High Oil Temp Warning
Step Action Value(s) Yes No 1 Was the “On-Board Diagnostic (OBD) System Check” — Go to Step 2 Go to OBD System Check 2 1. Ignition “ON,” engine “OFF.” Is the “Eng Cool Temp” below the specified value? 139 ° C (282 ° F) Go to Step 4 Go to Step 3 3 1. Ignition “ON,” engine “OFF.” Does the Tech 2 indicate DTC P0217 failed this — Go to Step 4 Refer to Diagnostic Aids 4 1. Ignition “ON,” engine “OFF.” conditions as noted. 4. Using a Tech 2, monitor “ DTC” info for DTC P1217. Does the Tech 2 indicate DTC P1217 failed this — Go to Step 5 Refer to Diagnostic Aids 5 1. Measure the engine oil quantity by oil level gage. Was the engine oil is shortaged? — Verify repair Go to Step 6 6 Replace the oil temp sensor. Is the action complete? — Verify repair Go to Step 7 7 Replace the oil cooler. Is the action complete? — Verify repair — |