|
|
Content .. 2152 2153 2154 2155 ..
6E–189 ENGINE DRIVEABILITY AND EMISSIONS DTC P0325 – KS Module Circuit
Step Action Value(s) Yes No 1 Was the “On-Board Diagnostic (OBD) System Check” — Go to Step 2 Go to OBD System Check 2 IMPORTANT: If an engine knock can be heard, repair 1. Operate the vehicle within parameters specified under criteria included in “Conditions for Setting the 2. Using Tech 2, monitor “Specific DTC” info for DTC P0325 until the DTC P0325 test runs. 3. Note the test result. Does Tech 2 indicate DTC P0325 failed this ignition? — Go to Step 4 Go to Step 3 3 1. Ignition “ON,” engine “OFF.” DTC P0325. 3. Operate the vehicle within Failure Records conditions. 4. Using Tech 2, monitor “Specific DTC” info for DTC P0325 until the DTC P0325 test runs. Does Tech 2 indicate DTC P0325 test failed this — Go to Step 4 Refer to Diagnostic Aids 4 Replace the PCM. IMPORTANT: The replacement PCM must be UBS 98model year Immobilizer Workshop Manual. Is the action complete? — Verify repair — |