|
|
Content .. 1052 1053 1054 1055 ..
4C–33 DRIVE SHAFT SYSTEM 412RS037 Reassembly 1. Install the new oil seal which has been immersed in differential gear oil, by using an oil seal installer 412RS043 2. Force a new needle bearing into inner shaft by using a installer 5–8840–2408–0 and grip 5–8840–0007–0. 412RS051 3. Place a new snap ring(internal) in inner shaft. Force a new inner shaft bearing into the inner shaft by 412RS044 4. Install snap ring(external). NOTE: Be careful not to damage the inner shaft. 5. Clean the housing contact surface of the front axle case and insert inner shaft assembly into the front |