|
|
Content .. 1463 1464 1465 1466 ..
6E–75 6VD1 3.2L ENGINE DRIVEABILITY AND EMISSIONS No Malfunction Indicator Lamp (MIL) 060R100064 Circuit Description The “Check Engine” lamp (MIL) should always be Diagnostic Aids An intermittent MIL may be cased by a poor connection, D Inspect the PCM harness and connections for D If the engine runs OK, check for a faulty light bulb, an D If the engine cranks but will not run, check for an open Test Description Number(s) below refer to the step number(s) on the condition suggests a faulty PCM ignition feed or 9. Using a test light connected to B+, probe each of the PCM ground terminals to ensure that a good ground PCM Terminal End View for terminal locations of the PCM ground circuits. 12.In this step, temporarily substitute a known good relay for the PCM relay. The horn relay is nearby, 17.This vehicle is equipped with a PCM which utilizes an electrically erasable programmable read only PCM Replacement and Programming Procedures |