Nissan Rogue Sport (2018 year). Instruction

4-88

Heater, air conditioner, audio and phone systems

. (A Name)

Say a name in the phonebook to bring
up a list of options for that phonebook
entry. The system will say the name it
interpreted based on the voice com-
mand provided. If the name is incor-
rect, say “Correction” to hear another
name.
Once the correct phonebook entry is
identified, say “Dial” to dial the number
or “Send Text” to send a text message
to that number. Say “Record Name” to
record a name for the phonebook
entry. Say “Delete Recording” to delete
a recorded name for the phonebook
entry.

. List Names

Speak this command to have the
system list the names in the phone-
book one by one alphabetically. Say
“Dial” to dial the number of the current
name or “Send Text” to send a text
message to that number. Say “Next
Entry” or “Previous Entry” to move
through the list alphabetically. Say
“Record Name” to record a name for
the current phonebook entry. Say
“Delete Recording” to delete a re-
corded name for the current phone-
book entry.

. Transfer Entry

This command can be used to trans-

fer multiple contacts at a time. To
enable manual contact transfer cap-
ability, set “Phonebook Download” to
“Off” in the Setting menu. The ability to
transfer contacts via the OPP Blue-
tooth® profile depends on your mobile
phone. For additional information, re-
fer to your phone’s owner’s manual.

. Delete Entry

Speak this command to delete an
entry in the phonebook. Choose an
entry to delete by speaking the de-
sired name or say “List Names”.

Recent Calls:

The following commands are available
under “Recent Calls”:
. Incoming Calls

Speak this command to list the last
five incoming calls to the vehicle. If the
call is from an entry in the phonebook,
the name will be displayed. Otherwise,
the phone number of the incoming
call will be displayed.
Say “Dial” to call the number or “Send
Text” to send a text message to that
number. Say “Next Entry” or “Previous
Entry” to move through the list of
incoming calls.

. Missed Calls

Speak this command to list the last
five missed calls to the vehicle. If the

call is from an entry in the phonebook,
the name will be displayed. Otherwise,
the phone number of the missed call
will be displayed.
Say “Dial” to call the number or “Send
Text” to send a text message to that
number. Say “Next Entry” or “Previous
Entry” to move through the list of
missed calls.

. Outgoing Calls

Speak this command to list the last
five outgoing calls from the vehicle. If
the call was to an entry in the phone-
book, the name will be displayed.
Otherwise, the phone number of the
outgoing call will be displayed.
Say “Dial” to call the number or “Send
Text” to send a text message to that
number. Say “Next Entry” or “Previous
Entry” to move through the list of
outgoing calls.

. Redial

Speak this command to call the last
number dialed.

. Call Back

Speak this command to call the num-
ber of the last incoming call to the
vehicle.

Messaging (if so equipped):

Speak this command to access text
messaging functions. For more informa-

tion on these commands, see “Text mes-
saging” (P.4-90).

Select Phone:

Speak this command to select a phone to
use from a list of those phones connected
to the vehicle.

Making a call

To make a call from a phone connected
to the vehicle’s Bluetooth® Hands-Free
Phone System:
1.

Push the

button.

2. The system will prompt you for a

command. Say “Call”.

3. Select one of the available voice

commands to continue:

(A Name)

Speak the name of a phonebook

entry to place a call to that entry.

The system will respond with the

name it interpreted from your com-

mand and will prompt you to con-

firm that the name is correct. Say

“Dial” to initiate the call or “Correc-

tion” to return to the previous

screen.

List Names

Select this command to call a

phone number that is stored in

the phonebook.

Phone Number

Speak this command to place a call

by inputting numbers.
For 7- and 10-digit phone numbers,

speak the numbers. When finished,

say “Dial” to initiate the call. Say

“Correction” at any time in the

process to correct a misspoken or

misinterpreted number.
For phone numbers with more

digits or special characters, say

“Special Number”, then speak the

digits. Up to 24 digits can be

entered. Available special charac-

ters are “Star”, “Pound”, “Plus” and

“Pause”. When finished, say “Dial” to

initiate the call. Say “Correction” at

any time in the process to correct a

misspoken or misinterpreted num-

ber or character.

Redial

Speak this command to dial the

number of the last outgoing call.

The system will display “Redial”. The

name of the phonebook entry will

be displayed if it is available. Other-

wise, the number being redialed will

be displayed.

Call Back

Speak this command to dial the

number of the last incoming call.

The system will display “Call Back”.

The name of the phonebook entry

will be displayed if it is available.

Otherwise, the number being called

back will be displayed.

Receiving a call

When a call is received by the phone
connected to the vehicle’s Bluetooth®
Hands-Free Phone System, the call infor-
mation is displayed on either the vehicle
information display or both the vehicle
information display and the color display.
Push the

button to accept the call.

Push the

button to reject the call.

During a call

While a call is active, push the

button

to access additional options. Speak one of
the following commands:
. Send

Speak this command followed by the
digits to enter digits during the phone
call.

. Mute On or Mute Off

Speak the command to mute or un-
mute the system.

. Transfer Call

Speak this command to transfer the
call to the handset. To transfer the call
back from the handset to the Blue-
tooth® Hands-Free Phone System,
push the

button and confirm

when prompted.

Heater, air conditioner, audio and phone systems

4-89

4-90

Heater, air conditioner, audio and phone systems

If supported by the phone, the Bluetooth®
Hands-Free Phone System allows for call
waiting functionality. If a call is received
while another call is already active, a
message will be displayed on the screen.
Push the

button to hold the active

call and switch to the second call. Push
the

button to reject the second call.

While the second call is active, pushing
the

button will allow the same

commands that are available during any
call as well as two additional commands:
. Switch Call

Speak this command to hold the
second call and switch back to the
original call.

. End Other Call

Speak this command to stay with the
second call and end the original call.

Push the

button to accept the call.

Push the

button to reject the call.

Ending a call

To end an active call, push the

button.

Text messaging (if so equipped)

WARNING

. Laws in some jurisdictions may

restrict the use of some of the
applications and features, such
as social networking and texting.

. Laws in some jurisdictions may

restrict the use of “Text-to-
Speech”. Check local regulations
before using this feature.

. Use the text messaging feature

after stopping your vehicle in a
safe location. If you have to use
the feature while driving, exercise
extreme caution at all times so
full attention may be given to
vehicle operation.

. If you are unable to devote full

attention to vehicle operation
while using the text messaging
feature, pull off the road to a safe
location and stop your vehicle.

NOTE:

. This feature is automatically dis-

abled if the connected device does
not support the Message Access
Profile (MAP). See the phone’s own-
er’s manual for details and instruc-
tions.

. Many phones may require special

permission to enable text messa-
ging. Check the phone’s screen dur-
ing Bluetooth® pairing. For some
phones, you may need to enable
“Notifications” in the phone’s Blue-
tooth® menu for text messages to
appear on the vehicle audio system.
See the phone’s owner’s manual for
details. Text message integration
requires that the phone support
MAP (Message Access Profile) for
both receiving and sending text
messages. Some phones may not
support all text messaging features.
Refer to www.nissanusa.com/blue-
tooth or www.nissan.ca/bluetooth
for compatibility information, as well
as your device’s owner’s manual.

The system allows for the sending and
receiving of text messages through the
vehicle interface.

Sending a text message:

Push the

button.

2. Say “Phone”.
3. Say “Send Text”.
4. The system will provide a list of

available commands in order to de-
termine the recipient of the text
message. Choose from the following:

To (a name)

Enter Number

Incoming Calls

Outgoing Calls

Missed Calls

If “Incoming Calls”, “Outgoing Calls”, or
“Missed Calls” is selected, the following
additional commands will be dis-
played:

Send Text

For more information about these
options, see “Voice commands” (P.4-
87).

5. Once a recipient is chosen, the system

prompts for which message to send.
Five predefined messages are avail-
able as well as three custom mes-
s a g e s . T o c h o o s e o n e o f t h e
predefined messages, speak one of
the following:

“Driving, can’t text”

“Call me”

“On my way”

“Running late”

“Okay”

“Yes”

“No”

“Where are you?”

“When?”

“Custom Messages”

To send one of the custom messages,
say “Custom Messages”. If more than
one custom message is stored, the
system will prompt for the number of
the desired custom message. For
more information on setting and
managing custom text messages,
see “Bluetooth® settings” (P.4-92).

Reading a received text message:

Push the

button.

2. Say “Phone”.
3. Say “Read Text”.
The text message, sender and delivery
time are shown on the screen. Use the
menu control buttons on the steering
wheel to scroll through all text messages
if more than one are available. Push the

button to exit the text message

screen. Push the

button to access

the following options for replying to the
text message:
. Call Back

Speak this command to call the sen-
der of the text message using the
Bluetooth® Hands-Free Phone Sys-
tem.

. Send Text

Speak this command to send a text

message response to the sender of
the text message.

. Read Text

Speak this command to read the text
message again.

. Previous Text

Speak this command to move to the
previous text message (if available).

. Next Text

Speak this command to move to the
next text message (if available).

NOTE:

. Text messages are only displayed if

the vehicle speed is less than 5 MPH
(8 km/h).

. iPhone® can only send text mes-

sages via Siri® Eyes Free.

Making custom messages with Siri®
Eyes Free:

If a connected iPhone® is equipped with
Siri®, it can also be used to create custom
messages. (See “Siri® Eyes Free” (P.4-79).)

Heater, air conditioner, audio and phone systems

4-91

4-92

Heater, air conditioner, audio and phone systems

JVH1626X

Bluetooth® settings

To access and adjust the settings for the
Bluetooth® Hands-Free Phone System:
1.

Push the ENTER SETTING button

2. Use the ENTER SETTING button

select “Bluetooth” and then push the
ENTER SETTING button

Bluetooth

Select “ON” or “OFF” to turn the

vehicle’s Bluetooth® system on or

off.

Add Phone

To connect a phone to the system,

see “Initialization” (P.4-86).

Delete Phone

Select to delete a phone from the

displayed list. The system will ask to

confirm before deleting the phone.

Replace Phone

Select to replace a phone from the

displayed list. When a selection is

made, the system will ask to con-

firm before proceeding. The re-

corded phonebook for the phone

being deleted will be saved as long

as the new phone’s phonebook is

the same as the old phone’s phone-

book.

Select Phone

Select to connect to a previously

connected phone from the dis-

played list.

Phonebook Download

Select to turn on or off the auto-

matic download of a connected

phone’s phonebook.

Siri

Select the

button operation for

Siri® Eyes Free function from “Short

Press” and “Long Press”. (See “Chan-

ging Siri® Eyes Free Settings (mod-

els without navigation system)”

(P.4-81).)
“Siri” is displayed only when a Siri®

Eyes Free enabled iPhone® is con-

nected to the vehicle.

Show Incoming Calls

Select “Driver Only” to have the

caller information displayed only in

the vehicle information display. Se-

lect “Both” to have the information

displayed in both the vehicle infor-

mation display and the color dis-

play.

Text Message (if so equipped)

Select to turn on or off the vehicle’s

text messaging feature.

New Text Sound (if so equipped)

Select to adjust the volume of the

sound that plays when a new text is

received by a phone connected to

the Bluetooth® Hands-Free Phone

System. The setting all the way to

the left indicates that the new text

sound will be muted.

S h o w I n c o m i n g T e x t ( i f s o
equipped)
Select “Driver Only” to have sender

information displayed only in the

vehicle information display. Select

“Both” to have the information dis-

played in both the vehicle informa-

tion display and the color display.

Select “None” to have no display of

sender information.

Edit Custom Messages (if so

equipped)
Select to set a custom message

that will be available with the

standard options when sending a

text message. To set a custom

message, send a text message to

your own phone number while the

phone is connected to the system.

Three custom messages can be set.

Custom messages can only be set

while the vehicle is stationary.

Auto Reply (if so equipped)

Select to turn on or off the Auto

Reply function. When enabled, the

vehicle will automatically send a

predefined text message to the

sender when a text message is

received while driving.

Auto Reply Message (if so equipped)

Select to choose the message that

is sent when the Auto Reply func-

tion is enabled. Choose from “I’m

Driving” or one of the three custom

messages stored in the system.

Vehicle Signature On/Off (if so

equipped)
Select to choose whether or not

the vehicle signature is added to

outgoing text messages from the

vehicle. This message cannot be

changed or customized.

WARNING

. Use a phone after stopping your

vehicle in a safe location. If you
have to use a phone while driving,
exercise extreme caution at all
times so full attention may be
given to vehicle operation.

. If you are unable to devote full

attention to vehicle operation
while talking on the phone, pull
off the road to a safe location and
stop your vehicle.

CAUTION

To avoid discharging the vehicle
battery, use a phone after starting
the engine.

Your vehicle is equipped with the Blue-
tooth® Hands-Free Phone System. If you
have a compatible Bluetooth® enabled
cellular phone, you can set up the wire-
less connection between your cellular
phone and the in-vehicle phone module.
With Bluetooth® wireless technology, you
can make or receive a hands-free tele-
phone call with your cellular phone in the

vehicle.
Once your cellular phone is connected to
the in-vehicle phone module, no other
phone connecting procedure is required.
Your phone is automatically connected
with the in-vehicle phone module when
the ignition switch is placed in the ON
position with the connected cellular
phone turned on and carried in the
vehicle.
You can register up to five different Blue-
tooth® cellular phones to the in-vehicle
phone module. However, you can talk on
only one cellular phone at a time.
NISSAN Voice Recognition system sup-
ports the phone commands, so dialing a
phone number using your voice is possi-
ble. For more details, see “NISSAN Voice
Recognition system (models with naviga-
tion system)” (P.4-100).
Before using the Bluetooth® Hands-Free
Phone System, refer to the following
notes.
. Set up the wireless connection be-

tween a cellular phone and the in-
vehicle phone module before using
the Hands-Free Phone System.

. Some Bluetooth® enabled cellular

phones may not be recognized by
the in-vehicle phone module. Please
visit www.nissanusa.com/bluetooth

Heater, air conditioner, audio and phone systems

4-93

Bluetooth® HANDS-FREE PHONE SYSTEM
(models with navigation system)

4-94

Heater, air conditioner, audio and phone systems

or www.nissan.ca/bluetooth for a re-
commended phone list and connect-
ing.

. You will not be able to use a hands-

free phone under the following condi-
tions:
— Your vehicle is outside of the cel-

lular service area.

— Your vehicle is in an area where it is

difficult to receive cellular signal;
such as in a tunnel, in an under-
ground parking garage, near a tall
building or in a mountainous area.

— Your cellular phone is locked to

prevent it from being dialed.

. When the radio wave condition is not

ideal or ambient sound is too loud, it
may be difficult to hear the other
person’s voice during a call.

. Immediately after the ignition switch

is placed in the ON position, it may be
impossible to receive a call for a short
period of time.

. Do not place the cellular phone in an

area surrounded by metal or far away
from the in-vehicle phone module to
prevent tone quality degradation and
wireless connection disruption.

. While a cellular phone is connected

through the Bluetooth® wireless con-
nection, the battery power of the
cellular phone may discharge quicker

than usual. The Bluetooth® Hands-
Free Phone System cannot charge
cellular phones.

. If the Bluetooth® Hands-Free Phone

System seems to be malfunctioning,
visit www.nissanusa.com/bluetooth
or www.nissan.ca/bluetooth for trou-
bleshooting help.

. Some cellular phones or other devices

may cause interference or a buzzing
noise to come from the audio system
speakers. Storing the device in a
different location may reduce or elim-
inate the noise.

. Refer to the cellular phone owner’s

manual regarding the telephone
charges, cellular phone antenna and
body, etc.

. The signal strength display on the

monitor will not coincide with the
signal strength display of some cellu-
lar phones.

REGULATORY INFORMATION

FCC Regulatory information

. CAUTION: To maintain compliance

with FCC’s RF exposure guidelines,
use only the supplied antenna. Un-
authorized antenna, modification, or
attachments could damage the trans-
mitter and may violate FCC regula-
tions.

. Operation is subject to the following

two conditions:
1) This device may not cause inter-

ference and

2) This device must accept any inter-

ference, including interference
that may cause undesired opera-
tion of the device.

IC Regulatory information

. Operation is subject to the following

two conditions: (1) this device may not
cause interference, and (2) this device
must accept any interference, includ-
ing interference that may cause un-
desired operation of the device.

. This Class B digital apparatus meets

all requirements of the Canadian In-
terference- Causing Equipment Regu-
lations.

Bluetooth® is a trademark
owned by Bluetooth SIG, Inc.
and licensed to Robert
Bosch GmbH.

JVH1627X

CONTROL BUTTONS AND MICRO-
PHONE

Control buttons:

Volume control buttons

2. Menu control buttons/OK button

While using the voice recognition sys-
tem, push the

buttons to

manually control the phone system.

button

Push the

button to initiate a voice

recognition operation session or an-
swer an incoming call.

INFO:

If “Siri” on the phone settings menu is
set to “Short Press”, pushing and
holding the

button initiates a

voice recognition operation session
for Hands-Free Phone operation. (See
“Phone settings” (P.4-99).)

button

Push the

button to reject the call.

The

button located on the control

panel can also be used to operate the
Bluetooth® Hands-Free Phone System.
Microphone:

Microphone is located near the map
lights.

VOICE COMMAND

You can use voice commands to operate
various Bluetooth® Hands-Free Phone
System features using the NISSAN Voice
Recognition system. For more details, see
“NISSAN Voice Recognition system (mod-
els with navigation system)” (P.4-100).

Voice Prompt Interrupt

While using the Voice Recognition system,
the system voice can be interrupted to
allow the user to speak commands. While
the system is speaking, push the
button on the steering wheel. The system
voice will stop and a tone will be heard.

Heater, air conditioner, audio and phone systems

4-95

4-96

Heater, air conditioner, audio and phone systems

After the tone, speak desired command
(displayed on the touch screen).

One Shot Call

To use the system faster, you may speak
the second level commands with the
main menu command on the main menu.
For example, push the

button and

after the tone say, “Call Redial”.

JVH1583X

Example

CONNECTING PROCEDURE

NOTE:

The connecting procedure must be
performed when the vehicle is station-
ary. If the vehicle starts moving during
the procedure, the procedure will be
cancelled.

Push the APPS·i button on the control
panel.

2. Touch the “Settings” key.
3. Touch the “Phone & Bluetooth” key.
4. Touch the “Connect New Device” key.
5. Initiate the connecting process from

the handset. The system will display

the message. If the PIN is displayed on
your Bluetooth® device, select “Yes” to
complete the pairing process.

For more information, see the Bluetooth®
device’s owner’s manual.

VEHICLE PHONEBOOK

To access the vehicle phonebook:
1.

Push the

button on the control

panel.

2. Touch the “Phonebook” key.
3. Choose the desired entry from the

displayed list.

4. The number of the entry will be

displayed on the screen. Touch the
number to initiate dialing.

NOTE:

To scroll quickly through the list, touch
the “A-Z” key in the upper right corner
of the screen. Turn the ENTER AUDIO/
TUNE·SCROLL dial to choose a letter or
number and then push the ENTER
AUDIO/TUNE·SCROLL dial. The list will
move to the first entry that begins with
that number or letter.

MAKING A CALL

To make a call, follow the procedure
below:
1.

Push the

button on the control

panel. The “PHONE” screen will appear
on the display.

2. Select one of the following options to

make a call:

. “Phonebook”: Select the name from an

entry stored in the vehicle phonebook.

. “Call Lists”: Select the name from the

incoming, outgoing or missed.

. “Redial”: Dial the last outgoing call

from the vehicle.

. “

”: Input the phone number manu-

ally using a keypad displayed on the
screen. For information on how to use
the touch screen, see “How to use
touch screen” (P.4-4).

RECEIVING A CALL

When a call is placed to the connected
phone, the display will change to phone
mode.
To accept the incoming call:
. Push the

button on the steering

wheel.

. Touch the call accept icon (

) on the

screen.

To reject the incoming call:

. Push the

button on the steering

wheel.

. Touch the phone end icon (

) on

the screen.

DURING A CALL

While a call is active, the following options
are available on the screen:
. “Handset”

Select this option to switch control of
the phone call over to the handset.

. “Mute Mic.”

Select this option to mute the micro-
phone. Select again to unmute the
microphone.

. Phone end (

) icon

Select to end the phone call.

ENDING A CALL

To end a phone call, select the phone end
(

) icon on the screen or push the

button on the steering wheel.

TEXT MESSAGING (if so equipped)

WARNING

. Laws in some jurisdictions may

restrict the use of some of the
applications and features, such
as social networking and texting.

. Laws in some jurisdictions may

restrict the use of “Text-to-
Speech”. Check local regulations
before using this feature.

. Use the text messaging feature

after stopping your vehicle in a
safe location. If you have to use
the feature while driving, exercise
extreme caution at all times so
full attention may be given to
vehicle operation.

. If you are unable to devote full

attention to vehicle operation
while using the text messaging
feature, pull off the road to a safe
location and stop your vehicle.

NOTE:

Many phones may require special per-
mission to enable text messaging.
Check the phone’s screen during Blue-
tooth® pairing. For some phones, you
may need to enable “Notifications” in
the phone’s Bluetooth® menu for text
messages to appear on the vehicle
audio system. See the phone’s owner’s
manual for details. Text message inte-
gration requires that the phone support
MAP (Message Access Profile) for both
receiving and sending text messages.
Some phones may not support all text
messaging features. Refer to www.nis-

Heater, air conditioner, audio and phone systems

4-97

4-98

Heater, air conditioner, audio and phone systems

sanusa.com/bluetooth or www.nissan.
ca/bluetooth for compatibility informa-
tion, as well as your device’s owner’s
manual.

The system allows for the sending and
receiving of text messages through the
vehicle interface.

Sending a text message

Push the

button on the steering

wheel.

2. Say “Phone” after the tone.
3. Say “Send Text” after the tone.
4. The system will provide a list of

available commands in order to de-
termine the recipient of the text
message. Choose from the following:

To (a name)

Enter Number

Missed Calls

Incoming Calls

Outgoing Calls

For more information about these
options, see “Phone voice commands”
(P.4-103).

5. Once a recipient is chosen, the system

prompts for which message to send.
Several predefined and custom mes-
sages are available. To choose one of
the predefined messages, speak one
of the following after the tone:

“Driving, can’t text”

“Call me”

“On my way”

“Running late”

“Okay”

“Yes”

“No”

“Where are you?”

“When?”

“Custom Messages”

NOTE:

iPhone® can only send text messages
via Siri® Eyes Free. (See “Siri® Eyes Free”
(P.4-79).)

Reading a received text message

Push the

button on the steering

wheel.

2. Say “Phone” after the tone.
3. Say “Read Text” after the tone.
The text message, sender and delivery
time are shown on the screen. Use the
menu control buttons to scroll through all

text messages if more than one are
available. Push the

button to exit

the text message screen. Push the
button to access the following options for
replying to the text message:
. Call Back

Speak this command to call the sen-
der of the text message using the
Bluetooth® Hands-Free Phone Sys-
tem.

. Send Text

Speak this command to send a text
message response to the sender of
the text message.

. Read Text

Speak this command to read the text
message again.

. Previous Text

Speak this command to move to the
previous text message (if available).

. Next Text

Speak this command to move to the
next text message (if available).

NOTE:

Text messages are only displayed if the
vehicle speed is less than 5 MPH (8
km/h).

Making custom messages with Siri®
Eyes Free

If a connected iPhone® is equipped with
Siri®, it can also be used to create custom
messages. (See “Siri® Eyes Free” (P.4-79).)

JVH0750X

PHONE AND Bluetooth® SETTINGS

To access the phone and Bluetooth®
settings:
1.

Push the APPS·i button.

2. Touch the “Settings” key.
3. Touch the “Phone & Bluetooth” key.

Menu

Item

Result

Phone
Settings

For detailed information, see
“Phone settings” (P.4-99).

Connect
New De-
vice

Touch to connect a new Blue-
tooth® device to the Bluetooth®
Hands-Free Phone System. (See
“Connecting procedure” (P.4-96).)

Select
Connec-
ted De-
vice

Touch to choose a Bluetooth®
device from a list of those devices
connected to the Bluetooth®
Hands-Free Phone System.

Replace
Connec-
ted De-
vice

Touch to replace a Bluetooth®
device from a list of those devices
connected to the Bluetooth®
Hands-Free Phone System.

Delete
Connec-
ted De-
vice

Touch to delete a Bluetooth® de-
vice from a list of those devices
connected to the Bluetooth®
Hands-Free Phone System.

Blue-
tooth

Touch to toggle Bluetooth® on and
off.

Phone settings

To access the phone settings:
1.

Push the APPS·i button.

2. Touch the “Settings” key.
3. Touch the “Phone & Bluetooth” key.
4. Touch the “Phone Settings” key and

adjust the following settings as de-
sired:

Heater, air conditioner, audio and phone systems

4-99

4-100

Heater, air conditioner, audio and phone systems

. Start Siri by:

Touch “Short Press” or “Long Press” to
set how Siri® is operated on the
steering wheel.

. Sort Phonebook By:

Touch “First Name” or “Last Name” to
choose how phonebook entries are
alphabetically displayed on the
screen.

. Use Phonebook From:

Touch “Handset” to use the phone’s
phonebook. Select “SIM” to use the
phonebook on the SIM card. Touch
“Both” to use both sources.

. Download Phonebook Now:

Touch to download the phonebook to
the vehicle from the chosen source.

. Record Name for Phonebook Entry:

Touch to record a name for a phone-
book entry for use with the NISSAN
Voice Recognition System.

. Phone Notifications for:

Touch “Driver” to have phone notifica-
tions shown in the vehicle information
display. Touch “Both” to have phone
notifications shown in both the vehi-
cle information display and the touch
screen.

. Text Messaging (if so equipped):

Touch to toggle the text message
functionality on or off.

. Show Incoming Text for (if so

equipped):
Touch “Driver” to have incoming text
notifications shown in the vehicle
information display. Touch “Both” to
have text notifications shown in both
the vehicle information display and
the touch screen. Touch “OFF” to turn
off all text notifications.

. Auto Reply (if so equipped):

Touch to toggle the auto reply func-
tionality on or off.

. Auto Reply Message (if so equipped):

Touch to indicate preferred message
to be sent when “Auto Reply” function
is activated.

. Use Vehicle’s Signature (if so

equipped):
Touch to toggle on or off the addition
of the vehicle signature to outgoing
messages

. Custom Text Messages (if so

equipped):
Touch this option to select a custom
message to edit. There are several
custom message slots available.

The NISSAN Voice Recognition system
allows hands-free operation of the sys-
tems equipped on this vehicle, such as
the phone and navigation systems.
To operate NISSAN Voice Recognition,
push the

button located on the

steering wheel. When prompted, speak
the command for the system you wish to
activate. The command given is picked up
by the microphone and performed when
it is properly recognized. NISSAN Voice
Recognition will provide a voice response
as well as a message in the touch screen
to inform you of the command results.

NISSAN VOICE RECOGNITION SYSTEM
(models with navigation system)

USING THE SYSTEM

Initialization

When the ignition switch is placed in the
ACC or ON position, NISSAN Voice Recog-
nition is initialized, which takes a few
seconds. When completed, the system is
ready to accept voice commands. If the

button is pushed before the initializa-

tion completes, the system will announce:
“Voice Recognition System not ready.
Please wait.”

JVH1656X

Volume control buttons

Back button

button

Giving voice commands

Follow the procedure below to conduct a
voice recognition operation:
1.

Push the

button.

2. The system announces: “Please say a

category like phone or a command
like points of interest followed by a
brand name”. A list of available com-
mands is then spoken by the system.

3. After the tone sounds and the face

icon on the display changes, speak a

command. Available commands are
discussed in this section.

4. Voice and display feedback are pro-

vided when the command is accepted.

. If you want to go back to the previous

menu of commands, push the
button on the steering wheel, back
button on the steering wheel or BACK
button on the control panel. The
system will announce: “Go Back” de-
pending on the current menu level.

. If you want to adjust the volume of the

voice feedback, use the volume con-
trol buttons on the steering wheel or
the POWER/VOLUME dial on the con-
trol panel.

. The voice command screen can also

be accessed using the touch screen:
1) Push the APPS·i button.
2) Touch the “Voice Commands” key.

Operating tips

To get the best performance out of
NISSAN Voice Recognition, observe the
following:
. Keep the interior of the vehicle as

quiet as possible. Close the windows
to eliminate the surrounding noises
(traffic noises, vibration sounds, etc.),
which may prevent the system from
recognizing the voice commands cor-

Heater, air conditioner, audio and phone systems

4-101

4-102

Heater, air conditioner, audio and phone systems

rectly.

. Wait until a tone sounds before speak-

ing a command. Otherwise, the com-
mand will not be received properly.

. Start speaking a command within 3.5

seconds after the tone sounds.

. Speak in a natural voice without

pausing between words.

JVH1687X

SYSTEM FEATURES

NISSAN Voice Recognition can activate
the following systems:
. Phone

. Navigation

. Audio

. Information

. My Apps

. Help
For additional information on the naviga-
tion system, see the separate Navigation
System Owner’s Manual.

How to say numbers

NISSAN Voice Recognition requires a
certain way to speak numbers in voice
commands. Refer to the following exam-
ples.
General rule: Either “zero” or “oh” can be
used for “0”.

Phone numbers:

Speak phone numbers according to the
following example. For 1-800-662-6200,
say dial number and then speak the
phone number in any of the following
formats:
. “one eight oh oh six six two six two oh

oh”

. “one eight hundred six six two six two

oh oh”

. “one eight zero zero six six two six two

oh oh”

For the best voice recognition phone
dialing results, say phone numbers as
single digits. Also, full numbers can only
be spoken for “800”. For example, you
cannot say 555-6000 as “five five five six
thousand”.

PHONE VOICE COMMANDS

To access the phone voice commands:
1.

Push the

button.

2. Say “Call” and then a name in the

phonebook to call that entry. Other-
wise, say “Phone” to access various
phone commands.

If the Bluetooth® has been set to “OFF”,
the system announces: “Bluetooth® is off.
Would you like to turn Bluetooth® on?”
If no phone is connected to the system
and the vehicle is stationary, the system
announces: “There is no phone con-
nected. Would you like to connect a
phone now?” Say “Yes” to connect a
phone. All further phone voice commands
are only available if a phone is connected.
If a phone is connected and Bluetooth® is
set to “ON”, the following voice com-
mands are available:
. Call (a name)

Speak the name of the contact in
which you are trying to call. System
will confirm correct contact. Say “Dial”
to initiate dialing.

. Dial Number

Allows for up to 24 digits to be dialed.
After the number is entered, say “Dial”
to initiate dialing. Say “Correction” to
correct the number entered. Say “Go

Back” to return to the main menu.

. List Phonebook

Starting with the first alphabetical
entry in the vehicle phonebook, the
system prompts for an additional
command. Say “Dial” to call the num-
ber of the phonebook entry. Say “Send
Text” to send a text message to the
number of the phonebook entry. Say
“Next Entry” to skip to the next alpha-
betical entry in the vehicle phonebook,
where the same options will then be
available.

. Recent Calls

The system prompts for an additional
command. Say “Missed Calls”, “Incom-
ing Calls” or “Outgoing Calls” to display
a list of such calls on the screen.
Speak the number of the entry dis-
played on the screen to dial that
number or say “Next Page” to view
entries on the next page (if available).

. Redial

Redials the last called number.

. Read Text (if so equipped)

Reads an incoming text message. For
more information about text messa-
ging with the Bluetooth® Hands-Free
Phone System, see “Text messaging”
(P.4-97).

. Send Text (if so equipped)

Sends a text message. For more
information about text messaging
with the Bluetooth® Hands-Free
Phone System, see “Text messaging”
(P.4-97).

. Select Phone

The system replies “Please use manual
controls to continue”. Use manual
controls to change the active phone
from among the listed phones con-
nected to the vehicle.

. Siri (if so equipped)

Siri® Eyes Free function can be acti-
vated. See “Siri® Eyes Free” (P.4-79) for
details.

For more information about the Blue-
tooth® Hands-Free Phone System, see
“Bluetooth® Hands-Free Phone System
(models with navigation system)” (P.4-93).

NAVIGATION SYSTEM VOICE COM-
MANDS

The following voice commands are avail-
able for the Navigation System:
. Street Address (address)

. Points of Interest (name)

. POI by Category

. Home

. Address Book

Heater, air conditioner, audio and phone systems

4-103

Nissan Rogue Sport (2018 year). Instruction - part 17